A Consecutive Separation Strategy Using a 3D‐Printed Microfluidic Chip to Achieve High‐Purity White Blood Cells From Blood
ELECTROPHORESIS · 2026
DOI: 10.1002/elps.70113 ↗Kurz gefasst
Fachartikel in der Zeitschrift ELECTROPHORESIS, 2026. Verfasst von Haoyuan Gu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical and Automation Engineering, and Jiangsu Key Laboratory of 3D Printing Equipment and Manufacturing, Nanjing Normal University, Na…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Leukocytes, Cell Separation, Microfluidic Analytical Techniques. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: Key Research and Development Program of Jiangsu Province, The Basic Research Program of Jiangsu Province, The Fundings for Institute for Life and Health, Nanjing Drum Tower Hospital, Nanjing Normal University.
Abstract (Originalsprache)
Label‐free and direct separation of white blood cells (WBCs) remains one of the major challenges in the field of efficient leukocyte separation. To address this challenge, we propose a WBC sorting strategy based on inertial microfluidics and 3D‐printing technology, which employs a single inertial microfluidic chip to perform four consecutive high‐throughput separation steps between red blood cells (RBCs) and WBCs. Specifically, the chip features a trapezoidal cross‐section spiral channel to achieve size‐dependent, stable spatial separation of cells along the inner and outer channels. After the conceptual design, the UV cured 3D printing technology is employed to fabricate the inertial chip and its fixture. Subsequently, mixed polystyrene microparticles are used as test objects to verify the sorting performance of the inertial chip, and the results indicate that the optimal separation flow rate is ∼1700 . This corresponds to a maximum WBC throughput of ∼1.12 × 10 7 cells/h during a single‐pass separation under the current 1:100 dilution condition, assuming a whole‐blood WBC concentration of 1.1 × 10 7 cells/mL. Ultimately, the diluted whole‐blood samples are used to examine the four‐cycle consecutive sorting strategy, and the results demonstrated that this strategy, proposed in this work, could directly obtain WBCs from blood samples with a recovery efficiency of ∼94.9% and a purity of ∼85.5%. Related experiments indicate that this strategy which is centered on the 3D‐printed chip offers high reliability and sensitivity for label‐free WBC sorting from blood cells. With the aid of state‐of‐art additive manufacturing technology, it is promising that our strategy could be widely applied on fields including cell analysis and disease diagnosis.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Electrical and Automation Engineering, and Jiangsu Key Laboratory of 3D Printing Equipment and Manufacturing, Nanjing Normal University, Nanjing, China.
- Institute for Life and Health, Nanjing Drum Tower Hospital, Nanjing Normal University, Nanjing, China.
- School of Mechanical Engineering, Jiangsu Key Laboratory For Design and Manufacture of Micro-Nano Biomedical Instruments, Southeast University, Nanjing, China.
Förderung
- Key Research and Development Program of Jiangsu Province
- The Basic Research Program of Jiangsu Province
- The Fundings for Institute for Life and Health, Nanjing Drum Tower Hospital, Nanjing Normal University
Zitieren
APA
Gu, H., Yang, F., Gao, C., Zhang, Z., Wang, L., Zhou, Y., Tang, W., Gao, X., & Zhu, S. (2026). A Consecutive Separation Strategy Using a 3D‐Printed Microfluidic Chip to Achieve High‐Purity White Blood Cells From Blood. ELECTROPHORESIS. https://doi.org/10.1002/elps.70113
Vancouver
Gu H, Yang F, Gao C, Zhang Z, Wang L, Zhou Y, et al. A Consecutive Separation Strategy Using a 3D‐Printed Microfluidic Chip to Achieve High‐Purity White Blood Cells From Blood. ELECTROPHORESIS. 2026. doi:10.1002/elps.70113
BibTeX
@article{Gu2026,
author = {Gu, Haoyuan and Yang, Feng and Gao, Chushan and Zhang, Zheda and Wang, Longlong and Zhou, Yubin and Tang, Wenlai and Gao, Xiang and Zhu, Shu},
title = {A Consecutive Separation Strategy Using a 3D‐Printed Microfluidic Chip to Achieve High‐Purity White Blood Cells From Blood},
journal = {ELECTROPHORESIS},
year = {2026},
doi = {10.1002/elps.70113}
}
EUVIMED