EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Three‐dimensional lab‐on‐a‐foil device for dielectrophoretic separation of cancer cells

Mengren Wu iD, Yuan Gao iD, Qiyue Luan iD, Ian Papautsky iD, Xiaolin Chen iD, Jie Xu iD

ELECTROPHORESIS · 2023

DOI: 10.1002/elps.202200287 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ELECTROPHORESIS, 2023. Verfasst von Mengren Wu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Industrial Engineering, University of Illinois Chicago, Chicago, Illinois, USA. Hauptthemen laut MEDLINE: Microfluidic Analytical Techniques, Neoplastic Cells, Circulating. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A simple, low‐cost, three‐dimensional (3D) lab‐on‐a‐foil microfluidic device for dielectrophoretic separation of circulating tumor cells (CTCs) is designed and constructed. Disposable thin films are cut by xurography and microelectrode array are made with rapid inkjet printing. The multilayer device design allows the studying of spatial movements of CTCs and red blood cells (RBCs) under dielectrophoresis (DEP). A numerical simulation was performed to find the optimum driving frequency of RBCs and the crossover frequency for CTCs. At the optimum frequency, RBCs were lifted 120 µm in z ‐axis direction by DEP force, and CTCs were not affected due to negligible DEP force. By utilizing the displacement difference, the separation of CTCs (modeled with A549 lung carcinoma cells) from RBCs in z ‐axis direction was achieved. With the nonuniform electric field at optimized driving frequency, the RBCs were trapped in the cavities above the microchannel, whereas the A549 cells were separated with a high capture rate of 86.3% ± 0.2%. The device opens not only the possibility for 3D high‐throughput cell separation but also for future developments in 3D cell manipulation through rapid and low‐cost fabrication.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Microfluidic Analytical TechniquesNeoplastic Cells, CirculatingHumansElectrophoresisCell SeparationA549 CellsErythrocytes

Stichwörter der Autor:innen

3D multilayer microfluidic deviceCTCs separationdielectrophoresislab-on-a-foil

Autor:innen und Institutionen

  • Department of Mechanical and Industrial Engineering, University of Illinois Chicago, Chicago, Illinois, USA.
  • Department of Mechanical Engineering, University of Memphis, Memphis, Tennessee, USA.
  • Department of Biomedical Engineering, University of Illinois Chicago, Chicago, Illinois, USA.
  • School of Engineering and Computer Science, Washington State University, Vancouver, Washington, USA.

ORCID-Profile: Mengren Wu, Yuan Gao, Qiyue Luan, Ian Papautsky, Xiaolin Chen, Jie Xu

Förderung

  • National Science Foundation

Zitieren

APA

Wu, M., Gao, Y., Luan, Q., Papautsky, I., Chen, X., & Xu, J. (2023). Three‐dimensional lab‐on‐a‐foil device for dielectrophoretic separation of cancer cells. ELECTROPHORESIS. https://doi.org/10.1002/elps.202200287

Vancouver

Wu M, Gao Y, Luan Q, Papautsky I, Chen X, Xu J. Three‐dimensional lab‐on‐a‐foil device for dielectrophoretic separation of cancer cells. ELECTROPHORESIS. 2023. doi:10.1002/elps.202200287

BibTeX
@article{Wu2023,
  author = {Wu, Mengren and Gao, Yuan and Luan, Qiyue and Papautsky, Ian and Chen, Xiaolin and Xu, Jie},
  title = {Three‐dimensional lab‐on‐a‐foil device for dielectrophoretic separation of cancer cells},
  journal = {ELECTROPHORESIS},
  year = {2023},
  doi = {10.1002/elps.202200287}
}
Kostenlos starten →