EUVIMEDEUVIMED entdecken
Crossref

A hydrodynamic injection approach for capillary electrophoresis using rotor–stator valves

Mauro S Ferreira Santos iD, Konstantin Zamuruyev, Maria F Mora, Aaron C Noell, Peter A Willis

ELECTROPHORESIS · 2023

DOI: 10.1002/elps.202200260 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ELECTROPHORESIS, 2023. Verfasst von Mauro S Ferreira Santos und 4 weiteren Autor:innen. Beteiligte Einrichtung: Jet Propulsion Laboratory, California Institute of Technology, Pasadena, California, USA. Hauptthemen laut MEDLINE: Hydrodynamics, Spectrometry, Mass, Electrospray Ionization. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 24 Literaturangaben. Gefördert von: Jet Propulsion Laboratory, California Institute of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sample injection is a critical step in a capillary electrophoresis (CE) analysis. Electrokinetic injection is the simplest approach and is often selected for implementation in portable CE instruments. However, in order to minimize the effect of sample matrix upon the results of a CE analysis, hydrodynamic injection is preferred. Although portable CE instruments with hydrodynamic injection have been reported, injection has always been performed at the grounded end of the capillary. This simplifies fluidic handling but limits coupling with electrochemical detectors and electrospray ionization–mass spectrometry (ESI–MS). We demonstrated previously that injection at the high‐voltage (HV) end of the capillary could be performed using an HV‐compatible rotary injection valve (fixed‐volume injection). However, the mismatch between the bore sizes of the channels on the rotor–stator valve and the separation capillary caused peak tailing and undesired mixing, impairing analytical performance. In this work, we present an HV‐compatible hydrodynamic injection approach that overcomes the issues associated with the fixed‐volume injection approach reported previously. The performance of the CE instrument was demonstrated by analyzing a mixture of 13 amino acids by CE coupled to laser‐induced fluorescence, which showed relative standard deviations for peak area and migration time below 5% and 1%, respectively, for triplicate analysis. Additionally, replicate measurements of a mixture of amino acids, peptides, nucleobases, and nucleosides by CE coupled to electrospray ionization–mass spectrometry (CE–ESI–MS) were performed to evaluate peak tailing, and results were similar to those obtained with a commercial CE–ESI–MS setup.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

HydrodynamicsSpectrometry, Mass, Electrospray IonizationElectrophoresis, CapillaryPeptidesAmino Acids

Stichwörter der Autor:innen

HV-compatible hydrodynamic injectionin situ analysisportable capillary electrophoresis instrumentspaceflight instrumentation

Substanzen

PeptidesAmino Acids

Autor:innen und Institutionen

  • Jet Propulsion Laboratory, California Institute of Technology, Pasadena, California, USA.

ORCID-Profile: Mauro S Ferreira Santos

Förderung

  • Jet Propulsion Laboratory
  • California Institute of Technology

Zitieren

APA

Ferreira Santos, M. S., Zamuruyev, K., Mora, M. F., Noell, A. C., & Willis, P. A. (2023). A hydrodynamic injection approach for capillary electrophoresis using rotor–stator valves. ELECTROPHORESIS. https://doi.org/10.1002/elps.202200260

Vancouver

Ferreira Santos MS, Zamuruyev K, Mora MF, Noell AC, Willis PA. A hydrodynamic injection approach for capillary electrophoresis using rotor–stator valves. ELECTROPHORESIS. 2023. doi:10.1002/elps.202200260

BibTeX
@article{FerreiraSantos2023,
  author = {Ferreira Santos, Mauro S and Zamuruyev, Konstantin and Mora, Maria F and Noell, Aaron C and Willis, Peter A},
  title = {A hydrodynamic injection approach for capillary electrophoresis using rotor–stator valves},
  journal = {ELECTROPHORESIS},
  year = {2023},
  doi = {10.1002/elps.202200260}
}
Kostenlos starten →