EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D‐Printed Electrodes Based on Polylactic Acid and Carbonaceous Materials for Electrochemical Sensors and Biosensors: Fabrication and Surface Activation via Chemical, Electrochemical, and Laser/Plasma Methods

Leonan dos Santos Rodrigues, Guilherme Sales da Rocha, Franccesca Fornasier, Raquel Ferreira Matos, João Victor Nicolini, Helen Conceição Ferraz

Electroanalysis · 2025-07 · 37 (7)

DOI: 10.1002/elan.70020 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electroanalysis, online erschienen am 22.07.2025. Verfasst von Leonan dos Santos Rodrigues und 5 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 122 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Surface preparation of 3D‐printed electrodes fabricated from conductive filaments is essential for enhancing their electroanalytical performance, as the inherent presence of insulating polymer matrices limits electrical conductivity. To overcome this limitation, a variety of post‐treatment strategies have been investigated, including chemical and electrochemical approaches, which have demonstrated promising results. In contrast, biological methods, such as enzymatic treatments, are often time‐consuming, and reagent‐free techniques may suffer from reproducibility issues, when not automated, due to operator‐dependent variability. Among the reagentless methods, laser and plasma treatments have emerged as reliable strategies to expose the conductive material, offering an environmentally friendly route for surface activation. This review explores 3D printing technologies, commonly used filaments, and the diverse activation protocols reported for electrodes based on polylactic acid and carbon‐based materials, including chemical, electrochemical, laser/plasma methods and their combinations. A critical analysis of these activation techniques and others found in the literature is also presented, highlighting their advantages, limitations, and applicability. Despite significant progress, no consensus has been reached regarding optimal treatment conditions, and the lack of standardized protocols remains a challenge. Furthermore, many studies select activation strategies based solely on electrochemical performance metrics, often without statistical validation, which may lead to the adoption of unnecessarily resource‐intensive procedures. Surface treatment methods should be chosen carefully, considering reagent availability, health and environmental risks, and economic feasibility. Optimizing surface activation protocols is essential to ensure improved electrode performance and reliability. Continued research is needed to refine these methods and establish standardized methodologies, ultimately advancing the development and application of 3D‐printed electrodes in electrochemical sensing and biosensing.

Förderung

  • Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro

Zitieren

APA

Rodrigues, L. D. S., Rocha, G. S. D., Fornasier, F., Matos, R. F., Nicolini, J. V., & Ferraz, H. C. (2025). 3D‐Printed Electrodes Based on Polylactic Acid and Carbonaceous Materials for Electrochemical Sensors and Biosensors: Fabrication and Surface Activation via Chemical, Electrochemical, and Laser/Plasma Methods. Electroanalysis, 37(7). https://doi.org/10.1002/elan.70020

Vancouver

Rodrigues LDS, Rocha GSD, Fornasier F, Matos RF, Nicolini JV, Ferraz HC. 3D‐Printed Electrodes Based on Polylactic Acid and Carbonaceous Materials for Electrochemical Sensors and Biosensors: Fabrication and Surface Activation via Chemical, Electrochemical, and Laser/Plasma Methods. Electroanalysis. 2025;37(7). doi:10.1002/elan.70020

BibTeX
@article{Rodrigues2025,
  author = {Rodrigues, Leonan dos Santos and Rocha, Guilherme Sales da and Fornasier, Franccesca and Matos, Raquel Ferreira and Nicolini, João Victor and Ferraz, Helen Conceição},
  title = {3D‐Printed Electrodes Based on Polylactic Acid and Carbonaceous Materials for Electrochemical Sensors and Biosensors: Fabrication and Surface Activation via Chemical, Electrochemical, and Laser/Plasma Methods},
  journal = {Electroanalysis},
  year = {2025},
  volume = {37},
  number = {7},
  doi = {10.1002/elan.70020}
}
Kostenlos starten →