EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Case study of a world hour record simulation in an elite cyclist: Insight into task failure

Mehdi Kordi iD, Dan Bigham, Jacob Tipper, Richard A Ferguson, Glyn Howatson, Jonathan Wale

European Journal of Sport Science · 2024

DOI: 10.1002/ejsc.12195 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Journal of Sport Science, 2024. Verfasst von Mehdi Kordi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Royal Dutch Cycling Federation (KNWU), Papendal, Arnhem, The Netherlands. Hauptthemen laut MEDLINE: Bicycling, Athletic Performance, Heart Rate, Body Temperature. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The ‘cycling hour‐record’ is one of the most prestigious events in cycling. However, little detailed analysis of such attempts is available. In preparation for a successful cycling hour‐record attempt, an elite cyclist performed a full‐hour simulation to provide insights into performance, physiological, aerodynamic and biomechanical limitations that could be identified in the preparation for a subsequent official attempt. Performance (speed, lap time, power and cadence), physiological (heart rate and estimated body temperature), aerodynamic (C D A, helmet angle, rotation and rock) and biomechanical (helmet, thigh and foot position changes) measurements were made throughout the attempt, in which an even‐pacing strategy was employed where the point of task failure was defined as the lap which the rider could no longer perform at the targeted lap split (16.6 s) or quicker. The cyclist did not achieve the target distance (54,000 m) during the simulation. The final distance achieved for the hour was 53,250 m. Task failure occurred at 38 min and 33 s (lap 139/34,750 m) into the simulation. Notably, there was a decrease in power output, accompanied with an increase in the estimated body temperature, changes in pedalling kinematics and an increase in aerodynamic drag. The reduction in performance (leading to task failure) during a cycling hour record simulation is underpinned by a decrease in power output as well as an increase in aerodynamic drag due to biomechanical changes in the cycling technique.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

BicyclingAthletic PerformanceHeart RateBody TemperatureHumansBiomechanical PhenomenaMaleAdultTask Performance and Analysis

Stichwörter der Autor:innen

cyclingperformancetask‐successworld‐record

Autor:innen und Institutionen

  • Royal Dutch Cycling Federation (KNWU), Papendal, Arnhem, The Netherlands.
  • Department of Sport, Exercise and Rehabilitation, Northumbria University, Newcastle, UK.
  • Ineos Grenadiers, Manchester, UK.
  • JTP Performance Coaching, Birmingham, UK.
  • School of Sport, Exercise and Health Sciences, Loughborough University, Loughborough, UK.
  • Water Research Group, North-West University, Potchefstroom, South Africa.

ORCID-Profile: Mehdi Kordi

Zitieren

APA

Kordi, M., Bigham, D., Tipper, J., Ferguson, R. A., Howatson, G., & Wale, J. (2024). Case study of a world hour record simulation in an elite cyclist: Insight into task failure. European Journal of Sport Science. https://doi.org/10.1002/ejsc.12195

Vancouver

Kordi M, Bigham D, Tipper J, Ferguson RA, Howatson G, Wale J. Case study of a world hour record simulation in an elite cyclist: Insight into task failure. European Journal of Sport Science. 2024. doi:10.1002/ejsc.12195

BibTeX
@article{Kordi2024,
  author = {Kordi, Mehdi and Bigham, Dan and Tipper, Jacob and Ferguson, Richard A and Howatson, Glyn and Wale, Jonathan},
  title = {Case study of a world hour record simulation in an elite cyclist: Insight into task failure},
  journal = {European Journal of Sport Science},
  year = {2024},
  doi = {10.1002/ejsc.12195}
}
Kostenlos starten →