EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enabling High‐Loading Aqueous Zinc–Sulfur Batteries Via a Ni Single‐Atom Catalytic Host with Hierarchical Sulfur Reservoirs

Zuoshu Wang, Xueyan Yang, Guochao Zhao, Dewei Wang, Yuhong Chen

ENERGY & ENVIRONMENTAL MATERIALS · 2026-09 · 9 (5)

DOI: 10.1002/eem2.70300 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ENERGY & ENVIRONMENTAL MATERIALS, online erschienen am 16.02.2026. Verfasst von Zuoshu Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aqueous zinc–sulfur batteries have drawn considerable interest owing to their high theoretical capacity, intrinsic safety, and cost‐effectiveness. Nevertheless, the sulfur cathode typically exhibits sluggish two‐electron solid‐state conversion reactions, resulting in a lower discharge voltage and inefficient sulfur utilization. Herein, we design a nickel single‐atom‐anchored on N‐doped carbon hollow structure featuring an internal three‐dimensional network‐like skeleton as the sulfur host to address these issues. The nickel single‐atom‐anchored on N‐doped carbon hollow structure synergistically combines atomic Ni‐N 4 catalytic sites as well as a hollow structure possessing a high specific surface area and hierarchical nanopores. Consequently, the resulting S@Ni‐SAs/NCHS achieves a high sulfur loading of ~74 wt% and a specific capacity of 1664.6 mAh g −1 at 0.1 A g −1 with a low polarization of 0.35 V. Besides, it maintains a capacity of 1154.4 mAh g −1 at 5 A g −1 and shows a retained capacity of 1038.6 mAh g −1 after 1000 cycles at 2 A g −1 , which corresponds to a decay rate of 0.03% per cycle. Density functional theory calculations reveal that the Ni‐N 4 site serves as an efficient electron donor, facilitating charge transfer and reducing the energy barrier of the rate‐determining step from 1.845 eV to 1.458 eV. Furthermore, a pouch cell with a high areal sulfur loading demonstrates specific capacities of 1200–1400 mAh g −1 under various bending states with discharge plateaus about 0.8 V, retaining 83.4% capacity after 200 cycles. This work underscores the critical role of integrating Ni atomic catalysis with well‐developed porosity within the carbon hollow structure for developing high‐performance aqueous zinc–sulfur batteries.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wang, Z., Yang, X., Zhao, G., Wang, D., & Chen, Y. (2026). Enabling High‐Loading Aqueous Zinc–Sulfur Batteries Via a Ni Single‐Atom Catalytic Host with Hierarchical Sulfur Reservoirs. ENERGY & ENVIRONMENTAL MATERIALS, 9(5). https://doi.org/10.1002/eem2.70300

Vancouver

Wang Z, Yang X, Zhao G, Wang D, Chen Y. Enabling High‐Loading Aqueous Zinc–Sulfur Batteries Via a Ni Single‐Atom Catalytic Host with Hierarchical Sulfur Reservoirs. ENERGY & ENVIRONMENTAL MATERIALS. 2026;9(5). doi:10.1002/eem2.70300

BibTeX
@article{Wang2026,
  author = {Wang, Zuoshu and Yang, Xueyan and Zhao, Guochao and Wang, Dewei and Chen, Yuhong},
  title = {Enabling High‐Loading Aqueous Zinc–Sulfur Batteries Via a Ni Single‐Atom Catalytic Host with Hierarchical Sulfur Reservoirs},
  journal = {ENERGY & ENVIRONMENTAL MATERIALS},
  year = {2026},
  volume = {9},
  number = {5},
  doi = {10.1002/eem2.70300}
}
Kostenlos starten →