AI ‐Driven Precision Annealing for High Performance Fe‐Based Amorphous Alloys
ENERGY & ENVIRONMENTAL MATERIALS · 2026-07 · 9 (4)
DOI: 10.1002/eem2.70227 ↗Kurz gefasst
Fachartikel in der Zeitschrift ENERGY & ENVIRONMENTAL MATERIALS, online erschienen am 06.01.2026. Verfasst von Yichuan Tang und 13 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
The magnetic properties of Fe‐based amorphous/nanocrystalline alloys are governed by composition, annealing process, and nanostructure. Although AI has advanced the development of soft magnetic amorphous alloys, the predominant focus on optimizing composition has resulted in insufficient understanding of the mechanisms of heat treatment and nanocrystalline precipitation. In this study, we propose an AI‐guided non‐isothermal annealing strategy that can accurately determine the critical Avrami exponent of 2.5, which corresponds to a transition from 3D growth to spatially confined nanocrystals during the process of crystallization. Applying this approach, we not only validated the performance of our previously reported Fe 85.5 B 8.5 Si 2 P 2 C 2 alloy but also achieved a record‐high B s of 1.97 T in Fe 69 Co 16 Ni 1 Si 3 B 11 . Moreover, even for commercial FINEMET alloy, the B s could still be enhanced by 6.2%, while simultaneously maintaining H c below 1 A m −1 . Compared to conventional annealing processes, this technique can both endow superior soft magnetic performance and achieve an average 500% improvement in annealing time. This study pioneers an AI strategy for Fe‐based amorphous/nanocrystalline alloys and may establish a paradigm for integrating AI with physical theories applicable to diverse material systems.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Tang, Y., Liu, S., Li, S., Ma, R., Li, P., Wang, Z., Wang, K., Cao, K., Ding, S., Zhou, C., Tian, F., Yang, S., Fang, M., & Zhang, Y. (2026). AI ‐Driven Precision Annealing for High Performance Fe‐Based Amorphous Alloys. ENERGY & ENVIRONMENTAL MATERIALS, 9(4). https://doi.org/10.1002/eem2.70227
Vancouver
Tang Y, Liu S, Li S, Ma R, Li P, Wang Z, et al. AI ‐Driven Precision Annealing for High Performance Fe‐Based Amorphous Alloys. ENERGY & ENVIRONMENTAL MATERIALS. 2026;9(4). doi:10.1002/eem2.70227
BibTeX
@article{Tang2026,
author = {Tang, Yichuan and Liu, Shaopeng and Li, Silong and Ma, Ruonan and Li, Peinan and Wang, Zheng and Wang, Kun and Cao, Kaiyan and Ding, Sidan and Zhou, Chao and Tian, Fanghua and Yang, Sen and Fang, Minxia and Zhang, Yin},
title = {AI ‐Driven Precision Annealing for High Performance Fe‐Based Amorphous Alloys},
journal = {ENERGY & ENVIRONMENTAL MATERIALS},
year = {2026},
volume = {9},
number = {4},
doi = {10.1002/eem2.70227}
}
EUVIMED