Silica Gel Supported Solid Amine Sorbents for CO 2 Capture
ENERGY & ENVIRONMENTAL MATERIALS · 2025-01 · 8 (1)
DOI: 10.1002/eem2.12832 ↗Kurz gefasst
Fachartikel in der Zeitschrift ENERGY & ENVIRONMENTAL MATERIALS, online erschienen am 04.10.2024. Verfasst von Baljeet Singh und 4 weiteren Autor:innen. Die Arbeit wurde bisher 51-mal zitiert (Crossref) und nennt 116 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Business Finland.
Abstract (Originalsprache)
Point source CO 2 capture (PSCC) is crucial for decarbonizing various industrial sectors, while direct air capture (DAC) holds promise for removing CO 2 directly from the air. Sorbents play a critical role in both technologies, with their performances, efficiency, cost, etc., largely depending on which type is used (physical or chemical). Solid amine sorbents (SAS) employed in the chemical adsorption of CO 2 are suitable for both PSCC and DAC. SAS offer significant advantages over liquid amines such as monoethanolamine (MEA), due to their ability to perform cyclic adsorption–desorption with much lower energy requirement. The environmental concern associated with MEA can be mitigated by SAS. Support materials have a significantly important role in stabilizing amine and enhancing stability and kinetics; varieties of support materials have been screened at a laboratory scale. One promising support material is a silica gel (SG), which is commercially available and attractive for designing cost‐effective sorbents for large‐scale CO 2 capture. Various impregnation methods such as physical adsorption and covalent functionalization have been employed to functionalize silica surfaces with amines. This review provided a comprehensive critical analysis of SG‐based SAS for CO 2 capture. We discussed and evaluated them in terms of their adsorption capacity, adsorption, and desorption conditions, and the kinetics involved in these processes. Finally, we proposed a few recommendations for further development of low‐cost, lower carbon footprint SAS for large‐scale deployment of CO 2 capture technology.
Förderung
- Business Finland
Zitieren
APA
Singh, B., Gorji, Z. E., Singh, R., Sharma, V., & Repo, T. (2025). Silica Gel Supported Solid Amine Sorbents for CO 2 Capture. ENERGY & ENVIRONMENTAL MATERIALS, 8(1). https://doi.org/10.1002/eem2.12832
Vancouver
Singh B, Gorji ZE, Singh R, Sharma V, Repo T. Silica Gel Supported Solid Amine Sorbents for CO 2 Capture. ENERGY & ENVIRONMENTAL MATERIALS. 2025;8(1). doi:10.1002/eem2.12832
BibTeX
@article{Singh2025,
author = {Singh, Baljeet and Gorji, Zahra Eshaghi and Singh, Rustam and Sharma, Vikas and Repo, Timo},
title = {Silica Gel Supported Solid Amine Sorbents for CO 2 Capture},
journal = {ENERGY & ENVIRONMENTAL MATERIALS},
year = {2025},
volume = {8},
number = {1},
doi = {10.1002/eem2.12832}
}
EUVIMED