Lithium Salt Combining Fluoroethylene Carbonate Initiates Methyl Methacrylate Polymerization Enabling Dendrite‐Free Solid‐State Lithium Metal Battery
ENERGY & ENVIRONMENTAL MATERIALS · 2024-11 · 7 (6)
DOI: 10.1002/eem2.12751 ↗Kurz gefasst
Fachartikel in der Zeitschrift ENERGY & ENVIRONMENTAL MATERIALS, online erschienen am 24.04.2024. Verfasst von Xue Ye und 8 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shenzhen Fundamental Research Program, National Key Research and Development Program of China.
Abstract (Originalsprache)
This work demonstrates a novel polymerization‐derived polymer electrolyte consisting of methyl methacrylate, lithium bis(trifluoromethanesulfonyl)imide and fluoroethylene carbonate. The polymerization of MMA was initiated by the amino compounds following an anionic catalytic mechanism. LiTFSI plays both roles including the initiator and Li ion source in the polymer electrolyte. Normally, lithium bis(trifluoromethanesulfonyl)imide has difficulty in initiating the polymerization reaction of methyl methacrylate monomer, a very high concentration of lithium bis(trifluoromethanesulfonyl)imide is needed for initiating the polymerization. However, the fluoroethylene carbonate additive can work as a supporter to facilitate the degree of dissociation of lithium bis(trifluoromethanesulfonyl)imide and increase its initiator capacity due to the high dielectric constant. The as‐prepared poly‐methyl methacrylate‐based polymer electrolyte has a high ionic conductivity (1.19 × 10 −3 S cm −1 ), a wide electrochemical stability window (5 V vs Li + /Li), and a high Li ion transference number () of 0.74 at room temperature (RT). Moreover, this polymerization‐derived polymer electrolyte can effectively work as an artificial protective layer on Li metal anode, which enabled the Li symmetric cell to achieve a long‐term cycling performance at 0.2 mAh cm −2 for 2800 h. The LiFePO 4 battery with polymerization‐derived polymer electrolyte‐modified Li metal anode shows a capacity retention of 91.17% after 800 cycles at 0.5 C. This work provides a facile and accessible approach to manufacturing poly‐methyl methacrylate‐based polymerization‐derived polymer electrolyte and shows great potential as an interphase in Li metal batteries.
Förderung
- Shenzhen Fundamental Research Program
- National Key Research and Development Program of China
Zitieren
APA
Ye, X., Liang, J., Du, B., Li, Y., Ren, X., Wu, D., Ouyang, X., Zhang, Q., & Liu, J. (2024). Lithium Salt Combining Fluoroethylene Carbonate Initiates Methyl Methacrylate Polymerization Enabling Dendrite‐Free Solid‐State Lithium Metal Battery. ENERGY & ENVIRONMENTAL MATERIALS, 7(6). https://doi.org/10.1002/eem2.12751
Vancouver
Ye X, Liang J, Du B, Li Y, Ren X, Wu D, et al. Lithium Salt Combining Fluoroethylene Carbonate Initiates Methyl Methacrylate Polymerization Enabling Dendrite‐Free Solid‐State Lithium Metal Battery. ENERGY & ENVIRONMENTAL MATERIALS. 2024;7(6). doi:10.1002/eem2.12751
BibTeX
@article{Ye2024,
author = {Ye, Xue and Liang, Jianneng and Du, Baorong and Li, Yongliang and Ren, Xiangzhong and Wu, Dazhuan and Ouyang, Xiaoping and Zhang, Qianling and Liu, Jianhong},
title = {Lithium Salt Combining Fluoroethylene Carbonate Initiates Methyl Methacrylate Polymerization Enabling Dendrite‐Free Solid‐State Lithium Metal Battery},
journal = {ENERGY & ENVIRONMENTAL MATERIALS},
year = {2024},
volume = {7},
number = {6},
doi = {10.1002/eem2.12751}
}
EUVIMED