EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stable Organic Solar Cells Enabled by Simultaneous Hole and Electron Interlayer Engineering

Wisnu Tantyo Hadmojo, Furkan H. Isikgor, Yuanbao Lin, Zhaoheng Ling, Qiao He, Hendrik Faber, Emre Yengel, Roshan Ali, Abdus Samad, Ryanda Enggar Anugrah Ardhi, Sang Young Jeong, Han Young Woo und 3 weitere

ENERGY & ENVIRONMENTAL MATERIALS · 2024-09 · 7 (5)

DOI: 10.1002/eem2.12712 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ENERGY & ENVIRONMENTAL MATERIALS, online erschienen am 11.05.2024. Verfasst von Wisnu Tantyo Hadmojo und 14 weiteren Autor:innen. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Abdullah University of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of high‐performance organic solar cells (OSCs) with high operational stability is essential to accelerate their commercialization. Unfortunately, our understanding of the origin of instabilities in state‐of‐the‐art OSCs based on bulk heterojunction (BHJ) featuring non‐fullerene acceptors (NFAs) remains limited. Herein, we developed NFA‐based OSCs using different charge extraction interlayer materials and studied their storage, thermal, and operational stabilities. Despite the high power conversion efficiency (PCE) of the OSCs (17.54%), we found that cells featuring self‐assembled monolayers (SAMs) as hole‐extraction interlayers exhibited poor stability. The time required for these OSCs to reach 80% of their initial performance (T 80 ) was only 6 h under continuous thermal stress at 85 °C in a nitrogen atmosphere and 1 h under maximum power point tracking (MPPT) in a vacuum. Inserting MoO x between ITO and SAM enhanced the T 80 to 50 and ~15 h after the thermal and operational stability tests, respectively, while maintaining a PCE of 16.9%. Replacing the organic PDINN electron transport layer with ZnO NPs further enhances the cells' thermal and operational stability, boosting the T 80 to 1000 and 170 h, respectively. Our work reveals the synergistic roles of charge‐selective interlayers and device architecture in developing efficient and stable OSCs.

Förderung

  • King Abdullah University of Science and Technology

Zitieren

APA

Hadmojo, W. T., Isikgor, F. H., Lin, Y., Ling, Z., He, Q., Faber, H., Yengel, E., Ali, R., Samad, A., Ardhi, R. E. A., Jeong, S. Y., Woo, H. Y., Schwingenschlögl, U., Heeney, M., & Anthopoulos, T. D. (2024). Stable Organic Solar Cells Enabled by Simultaneous Hole and Electron Interlayer Engineering. ENERGY & ENVIRONMENTAL MATERIALS, 7(5). https://doi.org/10.1002/eem2.12712

Vancouver

Hadmojo WT, Isikgor FH, Lin Y, Ling Z, He Q, Faber H, et al. Stable Organic Solar Cells Enabled by Simultaneous Hole and Electron Interlayer Engineering. ENERGY & ENVIRONMENTAL MATERIALS. 2024;7(5). doi:10.1002/eem2.12712

BibTeX
@article{Hadmojo2024,
  author = {Hadmojo, Wisnu Tantyo and Isikgor, Furkan H. and Lin, Yuanbao and Ling, Zhaoheng and He, Qiao and Faber, Hendrik and Yengel, Emre and Ali, Roshan and Samad, Abdus and Ardhi, Ryanda Enggar Anugrah and Jeong, Sang Young and Woo, Han Young and Schwingenschlögl, Udo and Heeney, Martin and Anthopoulos, Thomas D.},
  title = {Stable Organic Solar Cells Enabled by Simultaneous Hole and Electron Interlayer Engineering},
  journal = {ENERGY & ENVIRONMENTAL MATERIALS},
  year = {2024},
  volume = {7},
  number = {5},
  doi = {10.1002/eem2.12712}
}
Kostenlos starten →