EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Self‐smoothing lithium metal anode based on screen‐printed Cu‐mesh current collector for long‐term safety of lithium metal batteries

Dongdong Li, Yue He, Bin Chen, Jun Xu, Qingyi Liu, Shengchen Yang, Wen‐Yong Lai

EcoEnergy · 2024-06 · 2 (2) · 311-321

DOI: 10.1002/ece2.40 ↗

Kurz gefasst

Fachartikel in der Zeitschrift EcoEnergy, online erschienen am 20.05.2024. Verfasst von Dongdong Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Natural Science Foundation of Jiangsu Province, Jiangsu Planned Projects for Postdoctoral Research Funds.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium metal is an attractive anode candidate to enable high‐energy lithium battery systems. However, nonideal dendrite growth at the anode/separator interface hinders the safe application of lithium metal batteries (LMBs). Three‐dimensional (3D) current collectors (CCs) with high specific surface area could afford a crucial effect on suppressing dendrites, yet still subject to large thickness/weight and limited scalability for large‐area fabrication. Here, we show an industry‐compatible screen‐printing technique to prepare ultrathin (∼1.5 μm) and ultralight (∼0.54 mg cm −2 ) Cu mesh on commercial Cu foil to realize a long‐term safety of LMBs. In contrast to conventional laboratory level techniques, the screen‐printed Cu‐mesh CCs (∼8.3 mg cm −2 ), which are even lighter than the original Cu foil (∼8.84 mg cm −2 ), show a high compatibility for large‐area fabrication. Meanwhile, the periodic Cu mesh can be also used to regulate the homogeneous distribution of Li‐ion flux and thus, be in favor of realizing self‐smoothing anodes at even deep and fast plating/stripping of lithium. The resulting lithium anodes demonstrate a long‐term cyclic life of ∼840 h at 1 mA cm −2 with a high Coulombic efficiency of 97.5%. LMBs with Cu‐mesh CCs exhibit outstanding capacity retentions of ∼87% after 350 cycles at 1 C and ∼80% after 200 cycles at 5 C, suggesting a significant step of printable 3D CCs toward practical application of high‐energy LMBs.

Förderung

  • National Key Research and Development Program of China
  • Natural Science Foundation of Jiangsu Province
  • Jiangsu Planned Projects for Postdoctoral Research Funds

Zitieren

APA

Li, D., He, Y., Chen, B., Xu, J., Liu, Q., Yang, S., & Lai, W. (2024). Self‐smoothing lithium metal anode based on screen‐printed Cu‐mesh current collector for long‐term safety of lithium metal batteries. EcoEnergy, 2(2), 311-321. https://doi.org/10.1002/ece2.40

Vancouver

Li D, He Y, Chen B, Xu J, Liu Q, Yang S, et al. Self‐smoothing lithium metal anode based on screen‐printed Cu‐mesh current collector for long‐term safety of lithium metal batteries. EcoEnergy. 2024;2(2):311-321. doi:10.1002/ece2.40

BibTeX
@article{Li2024,
  author = {Li, Dongdong and He, Yue and Chen, Bin and Xu, Jun and Liu, Qingyi and Yang, Shengchen and Lai, Wen‐Yong},
  title = {Self‐smoothing lithium metal anode based on screen‐printed Cu‐mesh current collector for long‐term safety of lithium metal batteries},
  journal = {EcoEnergy},
  year = {2024},
  volume = {2},
  number = {2},
  pages = {311--321},
  doi = {10.1002/ece2.40}
}
Kostenlos starten →