Numerical investigation on the influence of mesoscopic deformation on contact area and hydraulic aperture to fracture seepage
Deep Underground Science and Engineering · 2026-06 · 5 (2) · 567-580
DOI: 10.1002/dug2.70028 ↗Kurz gefasst
Fachartikel in der Zeitschrift Deep Underground Science and Engineering, online erschienen am 22.05.2025. Verfasst von Chenghao Han und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shandong Province.
Abstract (Originalsprache)
Fluid flow through a single fracture is commonly described by the cubic law. However, deviations from this model are expected because natural fracture surfaces are rough and in contact with each other in discrete regions. In this study, the interactions between fracture closure, contact area, and hydraulic characterization of mesoscopic‐scale rough fractures were investigated. First, natural‐splitting fractures induced by Brazilian splitting were generated and digitally reproduced using a three‐dimensional scanner. The distribution characterization of the initial mechanical fracture apertures was described, and the variation in fracture contact area during fracture closure was evaluated. Second, numerical simulations of fluid flow between rough surfaces were conducted, and the Stokes equations were solved. The results reveal that the hydraulic aperture underwent three stages. When the contact area was less than 0.34%, changes in the hydraulic aperture resulted in flow rate changes that were consistent with the cubic law. When the contact area was between 0.34% and 14.41%, the hydraulic aperture gradually deviated from the cubic law and fell below the mean fracture aperture. At this stage, the hydraulic aperture should be fully considered rather than the mean fracture aperture. When the contact area exceeds 14.41%, although the mechanical fracture decreases with increasing strain, the influence of the contact area on the hydraulic aperture gradually diminishes. This is because the fractures contain less fluid, and the hydraulic aperture approaches the minimum. Finally, the relationship between mechanical and hydraulic aperture strains was established, improving geological engineering applications that account for fracture deformation.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Shandong Province
Zitieren
APA
Han, C., Bai, Y., Zhang, W., Zhang, J., Ma, H., & Li, W. (2026). Numerical investigation on the influence of mesoscopic deformation on contact area and hydraulic aperture to fracture seepage. Deep Underground Science and Engineering, 5(2), 567-580. https://doi.org/10.1002/dug2.70028
Vancouver
Han C, Bai Y, Zhang W, Zhang J, Ma H, Li W. Numerical investigation on the influence of mesoscopic deformation on contact area and hydraulic aperture to fracture seepage. Deep Underground Science and Engineering. 2026;5(2):567-580. doi:10.1002/dug2.70028
BibTeX
@article{Han2026,
author = {Han, Chenghao and Bai, Yuanlin and Zhang, Weijie and Zhang, Jicheng and Ma, Hongfa and Li, Weiye},
title = {Numerical investigation on the influence of mesoscopic deformation on contact area and hydraulic aperture to fracture seepage},
journal = {Deep Underground Science and Engineering},
year = {2026},
volume = {5},
number = {2},
pages = {567--580},
doi = {10.1002/dug2.70028}
}
EUVIMED