Manipulating drying‐induced carbon nanotube assemblies through substrate surface engineering
Droplet · 2026-07 · 5 (3)
DOI: 10.1002/dro2.70072 ↗Kurz gefasst
Fachartikel in der Zeitschrift Droplet, online erschienen am 11.06.2026. Verfasst von Ke Shui und 10 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
The unique one‐dimensional structure and outstanding optoelectronic properties of carbon nanotubes (CNTs) have motivated extensive research into their directed assembly. Although the droplet evaporation method offers a straightforward strategy for aligning CNTs, controlling the final deposited structure remains challenging due to the inherently high aspect ratio of CNTs. In this study, we prepared four substrates with distinct wettability and friction properties through surface modification. Time‐resolved contact angle analysis was employed to monitor the evolution of the three‐phase contact line and the evaporation kinetics of CNT droplets on these substrates. Combined with detailed microstructural characterization, we found that on hydrophobic, highly friction surfaces (NBE‐modified silica), strong friction stabilizes the contact line during droplet drying. At the same time, rapid solvent evaporation induces droplet shrinkage, leading to a pronounced circumferential flow along the droplet periphery. This flow promotes the formation of long‐range aligned CNT orientation bands with a width of ∼150 m (orientation degree of 9.2°) after drying. These findings provide insights for the design and modification of substrates used in evaporation‐driven oriented assembly of CNTs.
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Shui, K., Pan, D., Qin, T., Xiao, W., Li, X., Yang, H., Lin, J., Xie, Q., Harting, J., Qiu, S., & Ma, C. (2026). Manipulating drying‐induced carbon nanotube assemblies through substrate surface engineering. Droplet, 5(3). https://doi.org/10.1002/dro2.70072
Vancouver
Shui K, Pan D, Qin T, Xiao W, Li X, Yang H, et al. Manipulating drying‐induced carbon nanotube assemblies through substrate surface engineering. Droplet. 2026;5(3). doi:10.1002/dro2.70072
BibTeX
@article{Shui2026,
author = {Shui, Ke and Pan, Deng and Qin, Tongtong and Xiao, Wenxin and Li, Xin and Yang, Hao and Lin, Jian and Xie, Qingguang and Harting, Jens and Qiu, Song and Ma, Chang‐Qi},
title = {Manipulating drying‐induced carbon nanotube assemblies through substrate surface engineering},
journal = {Droplet},
year = {2026},
volume = {5},
number = {3},
doi = {10.1002/dro2.70072}
}
EUVIMED