A Two‐Stage Constant‐Voltage Wireless Power Transfer System and Its Design Method for Robotic Manipulators
International Journal of Circuit Theory and Applications · 13.11.2026
DOI: 10.1002/cta.70707 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Circuit Theory and Applications, online erschienen am 13.11.2026. Verfasst von Longyang Wang und 8 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities, China Postdoctoral Science Foundation.
Abstract (Originalsprache)
To address the problems of limited motion range, cable wear, and reduced reliability caused by conventional power cables during continuous rotation of robotic manipulator joints, this paper proposes a two‐stage constant voltage wireless power transfer system based on a cascaded LCC‐S compensation topology and its design method. The system transfers electrical energy from the transmitter to two receivers through magnetic coupling, enabling simultaneous power supply to multiple joint loads of the manipulator without physical cable connections. The paper elaborates on the system topology and operating principles, establishes an equivalent circuit model based on fundamental harmonic analysis, derives the constant voltage output condition and voltage gain formulas, and theoretically demonstrates that the output voltages of both stages are independent of the load when parasitic parameters are neglected. A simulation model is used to systematically analyze the effects of load variations and compensation inductance variations on output power, voltage, and efficiency, revealing the influence of key parameters on system performance. Based on the theoretical analysis and simulation optimization, a design procedure for the system parameters suitable for manipulator power supply is proposed. Finally, an experimental prototype is built. The experimental results show that the system achieves approximately constant voltage output within the load variation range, with the two outputs being largely decoupled. The output power of each stage reaches 50 W, and the maximum system efficiency reaches 87.1%.
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
- China Postdoctoral Science Foundation
Zitieren
APA
Wang, L., Yang, T., Luo, J., Li, W., Yin, X., Yuan, X., Li, X., Zhang, Z., & Shao, W. (2026). A Two‐Stage Constant‐Voltage Wireless Power Transfer System and Its Design Method for Robotic Manipulators. International Journal of Circuit Theory and Applications. https://doi.org/10.1002/cta.70707
Vancouver
Wang L, Yang T, Luo J, Li W, Yin X, Yuan X, et al. A Two‐Stage Constant‐Voltage Wireless Power Transfer System and Its Design Method for Robotic Manipulators. International Journal of Circuit Theory and Applications. 2026. doi:10.1002/cta.70707
BibTeX
@article{Wang2026,
author = {Wang, Longyang and Yang, Tiankuo and Luo, Jiahao and Li, Wei and Yin, Xiaokang and Yuan, Xinan and Li, Xiao and Zhang, Zhenquan and Shao, Weibin},
title = {A Two‐Stage Constant‐Voltage Wireless Power Transfer System and Its Design Method for Robotic Manipulators},
journal = {International Journal of Circuit Theory and Applications},
year = {2026},
doi = {10.1002/cta.70707}
}
EUVIMED