Upcycling Polyethylene Pyrolysis Oil Into Group IV Base Oil Lubricants
ChemSusChem · 14.08.2026 · 19 (15)
DOI: 10.1002/cssc.70928 ↗Kurz gefasst
Fachartikel in der Zeitschrift ChemSusChem, online erschienen am 31.07.2026. Verfasst von Daniel Kulas und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Michigan Technological University, Houghton, Michigan, USA. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: Defense Advanced Research Projects Agency, Michigan Technological University, Gary and Judy Anderson and Ron and Ann Marie Harma.
Abstract (Originalsprache)
Group IV base oil lubricants, also known as polyalphaolefins (PAO), are a high‐value product produced by the petroleum industry for the purpose of lubrication over a wide range of temperatures. In this study, proof‐of‐concept experiments were conducted to produce PAOs from pyrolyzed waste plastic. Pyrolysis oil containing C8–C17 hydrocarbons in the form of paraffinic alkenes was distilled to acquire C10–C12 α‐olefins products which were then oligomerized to form PAO. Key lubricating properties, including viscosity index and pour point, were found to be similar for the pyrolysis‐derived synthesized PAO base oils compared to a commercial synthetic lubricant. The synthetic PAO base oil was also found to have a metals (14–21 mg/kg) and sulfur content (10–24 mg/kg) below industry standard. An economic analysis was conducted to determine to potential of targeting high‐value products to improve the profitability of pyrolysis technologies. The process economics were found to be dependent on the yield of PAO from the pyrolysis waste plastic, with promising economic results above 4.5% yield of PAO per unit of pyrolyzed plastic. A life cycle assessment found lower GHG emissions from the proposed technology than from conventional petroleum‐derived lubricants.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, Michigan Technological University, Houghton, Michigan, USA.
ORCID-Profile: Daniel Kulas, Sarvada Chipkar
Förderung
- Defense Advanced Research Projects Agency
- Michigan Technological University
- Gary and Judy Anderson and Ron and Ann Marie Harma
Zitieren
APA
Kulas, D., Chipkar, S., Pillote, M., Wallis, G., Schwartz, D., Wirkkula, R., Flores, H., & Shonnard, D. (2026). Upcycling Polyethylene Pyrolysis Oil Into Group IV Base Oil Lubricants. ChemSusChem, 19(15). https://doi.org/10.1002/cssc.70928
Vancouver
Kulas D, Chipkar S, Pillote M, Wallis G, Schwartz D, Wirkkula R, et al. Upcycling Polyethylene Pyrolysis Oil Into Group IV Base Oil Lubricants. ChemSusChem. 2026;19(15). doi:10.1002/cssc.70928
BibTeX
@article{Kulas2026,
author = {Kulas, Daniel and Chipkar, Sarvada and Pillote, Mackenzie and Wallis, Grace and Schwartz, Daisy and Wirkkula, Ryan and Flores, Holly and Shonnard, David},
title = {Upcycling Polyethylene Pyrolysis Oil Into Group IV Base Oil Lubricants},
journal = {ChemSusChem},
year = {2026},
volume = {19},
number = {15},
doi = {10.1002/cssc.70928}
}
EUVIMED