EUVIMEDEUVIMED entdecken
Crossref

Multifunctional Polypyrrole Interphase Actively Manages Anion Transport for Stable, High‐Rate Zinc Anodes

Xuemei Sun, Yunqi Jia, Haosheng Lin, Liuzhang Ouyang iD, Renzong Hu iD, Lichun Yang iD, Min Zhu

ChemSusChem · 27.05.2026 · 19 (10)

DOI: 10.1002/cssc.70714 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemSusChem, online erschienen am 15.05.2026. Verfasst von Xuemei Sun und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, South China University of Tech…. Die Arbeit nennt 48 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Basic and Applied Basic Research Foundation of Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Zinc–nickel batteries (ZNBs) are a promising energy storage technology owing to their high output voltage, inherent safety, and cost‐effectiveness. However, their practical application is limited by zinc‐anode instability in alkaline electrolyte, which leads to performance‐degrading dendrite growth and passivation. To address this issue, we introduce an electropolymerized polypyrrole (PPy) film as a multifunctional artificial solid electrolyte interphase to stabilize the anode. The PPy layer facilitates the desolvation of OH − ions during discharge, enhancing reaction kinetics, while simultaneously restricting the diffusion of Zn(OH) 4 2− ions into the bulk electrolyte, thereby mitigating dendrite growth and anode passivation. Consequently, a full battery incorporating the protected anode with a Ni(OH) 2 cathode (ZnO@PPy||Ni(OH) 2 ) exhibits exceptional performance. Operating with a low electrolyte‐to‐capacity (E/DC) ratio of 0.05 mL mAh −1 and a high depth of discharge of 100%, the battery delivers 565 mAh g −1 after 245 stable cycles at 1 C. Moreover, when charged at 1 C and discharged at 10 C, it maintains 620 mAh g −1 over 340 cycles, with capacity retention of 94%. This work presents a simple and effective strategy for developing protective layers for Zn‐based anodes, offering a new design paradigm for engineering active electrode–electrolyte interphases to enable high‐performance ZNBs.

Schlagwörter

Stichwörter der Autor:innen

Zn anodeartificial solid electrolyte interphaseelectrodepositionpolypyrrolezinc–nickel battery

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, South China University of Technology, Guangzhou, China.

ORCID-Profile: Liuzhang Ouyang, Renzong Hu, Lichun Yang

Förderung

  • National Key Research and Development Program of China
  • Basic and Applied Basic Research Foundation of Guangdong Province

Zitieren

APA

Sun, X., Jia, Y., Lin, H., Ouyang, L., Hu, R., Yang, L., & Zhu, M. (2026). Multifunctional Polypyrrole Interphase Actively Manages Anion Transport for Stable, High‐Rate Zinc Anodes. ChemSusChem, 19(10). https://doi.org/10.1002/cssc.70714

Vancouver

Sun X, Jia Y, Lin H, Ouyang L, Hu R, Yang L, et al. Multifunctional Polypyrrole Interphase Actively Manages Anion Transport for Stable, High‐Rate Zinc Anodes. ChemSusChem. 2026;19(10). doi:10.1002/cssc.70714

BibTeX
@article{Sun2026,
  author = {Sun, Xuemei and Jia, Yunqi and Lin, Haosheng and Ouyang, Liuzhang and Hu, Renzong and Yang, Lichun and Zhu, Min},
  title = {Multifunctional Polypyrrole Interphase Actively Manages Anion Transport for Stable, High‐Rate Zinc Anodes},
  journal = {ChemSusChem},
  year = {2026},
  volume = {19},
  number = {10},
  doi = {10.1002/cssc.70714}
}
Kostenlos starten →