EUVIMEDEUVIMED entdecken
Crossref

Humidity‐Resistant Ambient‐Processed Organic Solar Cells via Siloxane‐Modified Polymer Donors

Deng Zhou, Yuntong Yang, Xuanchen Liu, Xinkang Wang, Lianjie Zhang, Jiafeng Zhang, Junwu Chen iD

ChemSusChem · 13.03.2026 · 19 (5)

DOI: 10.1002/cssc.202502725 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemSusChem, online erschienen am 03.03.2026. Verfasst von Deng Zhou und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Polymer Optoelectronic Materials and Devices, Guangdong Basic Research Center of Excellence for Energy and Information Polymer Materials…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Basic and Applied Basic Research Major Program of Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Random ternary copolymerization represents a highly efficient and effective strategy for developing high‐performance polymer donors for polymer solar cells (PSCs). In this study, a small portion of siloxane‐terminated side chain was introduced to replace alkyl side chains on benzodithiophene unit of a well‐known polymer PM6. Compared to PM6, the new terpolymers with 3%, 5%, and 10% siloxane‐terminated side chains (denoted as PM6‐C6Si3, PM6‐C6Si5, and PM6‐C6Si10) showed negligible variations in their absorption spectra, whereas their highest occupied molecular orbital (HOMO) energy levels were slightly upshifted. When paired with the acceptor Y6, the PM6‐C6Si5‐based device exhibited the highest power conversion efficiency (PCE). Notably, when processed in air with a high relative humidity (RH) of 90%, the PM6‐C6Si5‐based active layers, possessing higher and more balanced charge transport, also achieved significantly elevated PCEs if compared to PM6‐based ones. With more powerful L8‐BO acceptor, PM6‐C6Si5:L8‐BO active layers processed under nitrogen and 90% RH air achieved PCEs of 18.60% and 17.33%, respectively, all higher than the corresponding 18.03% and 16.66% of PM6:L8‐BO active layers. These results indicate that terpolymers with a small amount of siloxane side chain are beneficial for air processing, providing the potential for industrial application of organic photovoltaics.

Schlagwörter

Stichwörter der Autor:innen

air‐processingorganic solar cellsrandom copolymerizationsiloxane‐terminated side chainterpolymer

Autor:innen und Institutionen

  • Institute of Polymer Optoelectronic Materials and Devices, Guangdong Basic Research Center of Excellence for Energy and Information Polymer Materials, State Key Laboratory of Luminescent Materials and Devices, South Chi…

ORCID-Profile: Junwu Chen

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China
  • Basic and Applied Basic Research Major Program of Guangdong Province
  • China National Key Research and Development Plan Project

Zitieren

APA

Zhou, D., Yang, Y., Liu, X., Wang, X., Zhang, L., Zhang, J., & Chen, J. (2026). Humidity‐Resistant Ambient‐Processed Organic Solar Cells via Siloxane‐Modified Polymer Donors. ChemSusChem, 19(5). https://doi.org/10.1002/cssc.202502725

Vancouver

Zhou D, Yang Y, Liu X, Wang X, Zhang L, Zhang J, et al. Humidity‐Resistant Ambient‐Processed Organic Solar Cells via Siloxane‐Modified Polymer Donors. ChemSusChem. 2026;19(5). doi:10.1002/cssc.202502725

BibTeX
@article{Zhou2026,
  author = {Zhou, Deng and Yang, Yuntong and Liu, Xuanchen and Wang, Xinkang and Zhang, Lianjie and Zhang, Jiafeng and Chen, Junwu},
  title = {Humidity‐Resistant Ambient‐Processed Organic Solar Cells via Siloxane‐Modified Polymer Donors},
  journal = {ChemSusChem},
  year = {2026},
  volume = {19},
  number = {5},
  doi = {10.1002/cssc.202502725}
}
Kostenlos starten →