EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Characterization of Lignin‐Based Polycarbonate Polyols for Flexible Polyurethane Foam Application

Enoch Kofi Acquah, Daniel Holmes, Kevin Dunne, Anibal Bher, Saeid Ansari Sadrabadi, Amin Joodaky, Rafael Auras, Mojgan Nejad iD

ChemSusChem · 2026-01 · 19 (2)

DOI: 10.1002/cssc.202502528 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemSusChem, online erschienen am 29.01.2026. Verfasst von Enoch Kofi Acquah und 7 weiteren Autor:innen. Beteiligte Einrichtung: Chemical Engineering and Materials Science Department, Michigan State University, East Lansing, Michigan, USA. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: United Soybean Board, MTRAC, National Institute of Food and Agriculture.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the rising demand for sustainable materials, lignin‐based polyols offer a promising renewable alternative to traditional petroleum‐based polyols in flexible polyurethane (PU) foams. This study focuses on synthesizing novel high‐performance lignin‐based polycarbonate polyols via transesterification with dimethyl carbonate. The resulting lignin polyols exhibited hydroxyl values ranging from 111 to 179 mg KOH/g and viscosities of 12,000–26,000 mPa·s, thereby enhancing the suitability of lignin for flexible foam formulation. An in‐depth structural analysis using proton, carbon, phosphorus, and 2D nuclear magnetic resonance confirmed the grafting of long polyether chains and the introduction of multiple carbonate linkages onto the lignin structure. Foams were formulated by replacing up to 60% of petroleum‐based polyols with either synthesized lignin polyol or a mixture of lignin and soy polyols. Formulated foams demonstrated superior mechanical properties, including enhanced tensile strength and load‐bearing capacity, compared to petroleum‐based foams. Additionally, the developed foams with biobased polyols exhibited improved thermal stability, shock absorption, and partial biodegradability.

Schlagwörter

Stichwörter der Autor:innen

flexible foamlignin polycarbonate polyoloxyalkylationpolyurethanetransesterification

Autor:innen und Institutionen

  • Chemical Engineering and Materials Science Department, Michigan State University, East Lansing, Michigan, USA.
  • Department of Chemistry, Michigan State University, East Lansing, Michigan, USA.
  • School of Packaging, Michigan State University, East Lansing, Michigan, USA.
  • Department of Forestry, Michigan State University, East Lansing, Michigan, USA.

ORCID-Profile: Mojgan Nejad

Förderung

  • United Soybean Board
  • MTRAC
  • National Institute of Food and Agriculture

Zitieren

APA

Acquah, E. K., Holmes, D., Dunne, K., Bher, A., Sadrabadi, S. A., Joodaky, A., Auras, R., & Nejad, M. (2026). Synthesis and Characterization of Lignin‐Based Polycarbonate Polyols for Flexible Polyurethane Foam Application. ChemSusChem, 19(2). https://doi.org/10.1002/cssc.202502528

Vancouver

Acquah EK, Holmes D, Dunne K, Bher A, Sadrabadi SA, Joodaky A, et al. Synthesis and Characterization of Lignin‐Based Polycarbonate Polyols for Flexible Polyurethane Foam Application. ChemSusChem. 2026;19(2). doi:10.1002/cssc.202502528

BibTeX
@article{Acquah2026,
  author = {Acquah, Enoch Kofi and Holmes, Daniel and Dunne, Kevin and Bher, Anibal and Sadrabadi, Saeid Ansari and Joodaky, Amin and Auras, Rafael and Nejad, Mojgan},
  title = {Synthesis and Characterization of Lignin‐Based Polycarbonate Polyols for Flexible Polyurethane Foam Application},
  journal = {ChemSusChem},
  year = {2026},
  volume = {19},
  number = {2},
  doi = {10.1002/cssc.202502528}
}
Kostenlos starten →