Mechanically Robust Polyimide Binder Realizes Stable and High Electrochemical Performance for Micro‐Silicon Anodes in Lithium‐Ion Batteries
ChemSusChem · 16.02.2025 · 18 (4)
DOI: 10.1002/cssc.202401768 ↗Kurz gefasst
Fachartikel in der Zeitschrift ChemSusChem, online erschienen am 10.11.2024. Verfasst von Xiaoxiao Liang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry and Chemical Engineering, Key Laboratory of Ministry of Education for Advanced Materials in Tropical Island Resources, Collaborat…. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: The Hainan Province Science and Technology Special Fund, Hebei Provincial Postdoctoral Science Foundation, Innovative Research Group Project of the National Natural Science Foundation of China.
Abstract (Originalsprache)
Silicon anodes have been considered one of the most promising candidates for Li‐ion batteries due to their high theoretical specific capacity. However, the practical use of silicon anodes is impeded due to side reactions and volumetric change (from 300~400%) charge/discharge process. Binders played a crucial role in Li‐ion batteries by effectively mitigating the stress resulting from the volumetric expansion in silicon‐based anodes. Herein, we developed a mechanically stable polyimide binder PI‐CF 3 that introduced trifluoromethyl and hydroxyl groups for commercial microparticular silicon anodes. With a highest Young′s modulus of ~921.1 MPa, the binder presented the maximum resilience during the charging and discharging of Micro‐Si, integrating the morphology, and reducing the degree to which the electrode disrupted ion and electric pathways. Moreover, −OH and −CF 3 groups of the binder could potentially interact with oxide layer at the surface of silicon through hydron bonds, and thereby results in a cross‐linking network to improve interface stability during cycling. The as‐prepared PI‐CF 3 binder with excellent intrinsic mechanical and electro‐rich groups stabilizes the electrode structure and facilitates fast Li + transportation. Consequently, micro‐Si anode delivered initial specific capacity of 1838 mAh g −1 (at 0.6 A g −1 ), and at high mass (Si loading = 0.78 mg cm −2 ) these was retained about 1219 mAh g −1 after 330 cycles (only −0.061% capacity reduction per cycle).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Chemistry and Chemical Engineering, Key Laboratory of Ministry of Education for Advanced Materials in Tropical Island Resources, Collaborative Innovation Center of Ecological Civilization, Hainan University, N…
- Key Laboratory of Cluster Science of Ministry of Education, Beijing Key Laboratory of Photoelectronic/Electrophotonic Conversion Materials, School of Chemistry, Chemical Engineering Beijing Institute of Technology, Beij…
ORCID-Profile: Binjie Zhang, Niaz Ahmad, Wen Yang
Förderung
- The Hainan Province Science and Technology Special Fund
- Hebei Provincial Postdoctoral Science Foundation
- Innovative Research Group Project of the National Natural Science Foundation of China
- National Natural Science Foundation of China
Zitieren
APA
Liang, X., Zhang, B., Ahmad, N., Yu, X., Zeng, C., Dong, Q., & Yang, W. (2025). Mechanically Robust Polyimide Binder Realizes Stable and High Electrochemical Performance for Micro‐Silicon Anodes in Lithium‐Ion Batteries. ChemSusChem, 18(4). https://doi.org/10.1002/cssc.202401768
Vancouver
Liang X, Zhang B, Ahmad N, Yu X, Zeng C, Dong Q, et al. Mechanically Robust Polyimide Binder Realizes Stable and High Electrochemical Performance for Micro‐Silicon Anodes in Lithium‐Ion Batteries. ChemSusChem. 2025;18(4). doi:10.1002/cssc.202401768
BibTeX
@article{Liang2025,
author = {Liang, Xiaoxiao and Zhang, Binjie and Ahmad, Niaz and Yu, Xianzhe and Zeng, Chaoyuan and Dong, Qinxi and Yang, Wen},
title = {Mechanically Robust Polyimide Binder Realizes Stable and High Electrochemical Performance for Micro‐Silicon Anodes in Lithium‐Ion Batteries},
journal = {ChemSusChem},
year = {2025},
volume = {18},
number = {4},
doi = {10.1002/cssc.202401768}
}
EUVIMED