EUVIMEDEUVIMED entdecken
Übersichtsarbeit

High‐Performance Sodium‐Ion Batteries with Graphene: An Overview of Recent Developments and Design

Sachin Sharma Ashok Kumar, M Nujud Badawi, J Liew, Thibeorchews Prasankumar, K Ramesh, S Ramesh, S Ramesh, S K Tiong

ChemSusChem · 14.01.2025 · 18 (2)

DOI: 10.1002/cssc.202400958 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift ChemSusChem, online erschienen am 16.10.2024. Verfasst von Sachin Sharma Ashok Kumar und 7 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Ionics University of Malaya, Department of Physics, Faculty of Science, Universiti Malaya, 50603, Kuala Lumpur, Malaysia. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 241 Literaturangaben. Gefördert von: Universiti Tenaga Nasional, Tenaga Nasional Berhad, UNITEN.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to their low production cost, sodium‐ion batteries (SIBs) are considered attractive alternatives to lithium‐ion batteries (LIBs) for next generation sustainable and large‐scale energy storage systems. However, during the charge/discharge cycle, a large volume strain is resulted due to the presence of a large radius of sodium ions and high molar compared to lithium ions, which further leads to poor cyclic stability and lower reversible capacity. In the past, researchers have devoted significant efforts to explore various anode materials to achieve SIBs with high energy density. Hence, as a promising anode material for SIBs, the two‐dimensional (2D) materials including graphene and its derivatives and metal oxides have attracted remarkable attention due to their layered structure and superior physical and chemical properties. The inclusion of graphene and metal oxides with other nanomaterials in electrodes have led to the significant enhancements in electrical conductivity, reaction kinetics, capacity, rate performance and accommodating the large volume change respectively. Moreover, these 2D materials facilitated large surface areas and shorter paths for sodium ion adsorption and transportation respectively. In this review article, the fabrication techniques, structural configuration, sodium ion storage mechanism and its electrochemical performances will be introduced. Subsequently, an insight into the recent advancements in SIBs associated with 2D anode materials (graphene, graphene oxide (GO), transition metal oxides etc.) and other graphene‐like elementary analogues (germanene, stanine etc.) as anode materials respectively will be discussed. Finally, the key challenges and future perspectives of SIBs towards enhancing the sodium storage performance of graphene‐based electrode materials are discussed. In summary, we believe that this review will shed light on the path towards achieving long‐cycling life, low operation cost and safe SIBs with high energy density using 2D anode materials and to be suitably commercialized for large‐scale energy storage applications in the future.

Schlagwörter

Stichwörter der Autor:innen

Anode materialsCathode materialsEnergy storageGrapheneNanomaterialsSodium-ion batteries

Autor:innen und Institutionen

  • Centre for Ionics University of Malaya, Department of Physics, Faculty of Science, Universiti Malaya, 50603, Kuala Lumpur, Malaysia.
  • Institute of Sustainable Energy, Universiti Tenaga Nasional, Jalan Ikram-Uniten, Kajang, 43000, Selangor, Malaysia.
  • School of Engineering, Taylor's University, 1 Jalan Taylor's, 47500, Subang Jaya, Selangor, Malaysia.
  • University of Hafr Al-Batin, Department of Physics, College of Science, Hafer Al-Batin, 39921, Saudi Arabia.
  • Institute of Power Engineering, College of Engineering, Universiti Tenaga Nasional, Jalan Ikram-Uniten, Kajang, 43000, Selangor, Malaysia.
  • Department of Physical Sciences, Saveetha School of Engineering, Saveetha University (SIMATS), Chennai, India.

Förderung

  • Universiti Tenaga Nasional
  • Tenaga Nasional Berhad
  • UNITEN
  • BOLDREFRESH2025-Centre of Excellence
  • Dato' Low Tuck Kwong International Energy Transition Grant
  • Universiti Malaya

Zitieren

APA

Kumar, S. S. A., Nujud Badawi, M., Liew, J., Prasankumar, T., Ramesh, K., Ramesh, S., Ramesh, S., & Tiong, S. K. (2025). High‐Performance Sodium‐Ion Batteries with Graphene: An Overview of Recent Developments and Design. ChemSusChem, 18(2). https://doi.org/10.1002/cssc.202400958

Vancouver

Kumar SSA, Nujud Badawi M, Liew J, Prasankumar T, Ramesh K, Ramesh S, et al. High‐Performance Sodium‐Ion Batteries with Graphene: An Overview of Recent Developments and Design. ChemSusChem. 2025;18(2). doi:10.1002/cssc.202400958

BibTeX
@article{Kumar2025,
  author = {Kumar, Sachin Sharma Ashok and Nujud Badawi, M and Liew, J and Prasankumar, Thibeorchews and Ramesh, K and Ramesh, S and Ramesh, S and Tiong, S K},
  title = {High‐Performance Sodium‐Ion Batteries with Graphene: An Overview of Recent Developments and Design},
  journal = {ChemSusChem},
  year = {2025},
  volume = {18},
  number = {2},
  doi = {10.1002/cssc.202400958}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche