Surface Properties, Color Stability, and Bacterial Adhesion of Implant‐Supported Provisional Restorative Materials: In Vitro Study
Clinical and Experimental Dental Research · 2026-10 · 12 (5)
DOI: 10.1002/cre2.70461 ↗Kurz gefasst
Fachartikel in der Zeitschrift Clinical and Experimental Dental Research, online erschienen am 12.10.2026. Verfasst von Júlia Bárbara Medeiros Galvão und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dentistry, Federal University of Rio Grande do Norte, Natal, Brazil. Hauptthemen laut MEDLINE: Bacterial Adhesion, Dental Materials, Dental Prosthesis, Implant-Supported, Dental Restoration, Temporary. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordenação de Aperfeiçoamento de Pessoal de Nível Superior.
Abstract (Originalsprache)
Objectives
To evaluate surface roughness, wettability, color stability, and bacterial adhesion of different materials used in implant‐supported provisional restorations. Materials and Methods Eighty samples (6 × 6 × 2 mm ± 0.2 mm) were fabricated and distributed into four groups ( n = 20): Bis‐acryl composite resin (BCR); CAD‐CAM PMMA resin (Milled); Auto‐polymerized acrylic resin (APR); prefabricated acrylic tooth (PT). Surface roughness was measured using a 3D optical profilometer, wettability by the sessile drop method, and color stability with a spectrophotometer after immersion in distilled water and coffee. Bacterial adhesion was assessed through Streptococcus mutans biofilm formation and quantified spectrophotometrically after crystal violet staining. Data were analyzed using Kruskal–Wallis and one‐way ANOVA with Tukey's post hoc test ( α = 0.05).
Results
Bis‐acryl composite resin (BCR) showed the lowest surface roughness, while prefabricated acrylic tooth (PT) exhibited higher roughness and contact angle values ( p < 0.001) and the greatest color change (Δ E ≥ 3.3). BCR demonstrated the highest bacterial adhesion, whereas CAD‐CAM PMMA resin (Milled) showed the lowest adhesion.
Conclusions
The behavior of provisional restorative materials is influenced by their composition, affecting surface, optical, and biological performance. Lower surface roughness did not result in reduced biofilm formation. CAD/CAM‐milled and Auto‐polymerized resins showed more favorable overall performance.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Dentistry, Federal University of Rio Grande do Norte, Natal, Brazil.
- Department of Dentistry, University of Pernambuco, Arcoverde, Brazil.
- Department of Restorative Dentistry, Federal University of Paraíba, João Pessoa, Brazil.
ORCID-Profile: Aliane da Silva Bezerra, Liliane Cristina Nogueira Marinho, Ana Luísa de Barros Pascoal, Pedro Henrique Sette de Souza, André Ulisses Dantas Batista, Patrícia Dos Santos Calderon
Förderung
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Zitieren
APA
Galvão, J. B. M., Costa, R. N., da Silva Bezerra, A., Marinho, L. C. N., de Barros Pascoal, A. L., de Souza, P. H. S., Batista, A. U. D., & Dos Santos Calderon, P. (2026). Surface Properties, Color Stability, and Bacterial Adhesion of Implant‐Supported Provisional Restorative Materials: In Vitro Study. Clinical and Experimental Dental Research, 12(5). https://doi.org/10.1002/cre2.70461
Vancouver
Galvão JBM, Costa RN, da Silva Bezerra A, Marinho LCN, de Barros Pascoal AL, de Souza PHS, et al. Surface Properties, Color Stability, and Bacterial Adhesion of Implant‐Supported Provisional Restorative Materials: In Vitro Study. Clinical and Experimental Dental Research. 2026;12(5). doi:10.1002/cre2.70461
BibTeX
@article{Galvo2026,
author = {Galvão, Júlia Bárbara Medeiros and Costa, Richelle Nunes and da Silva Bezerra, Aliane and Marinho, Liliane Cristina Nogueira and de Barros Pascoal, Ana Luísa and de Souza, Pedro Henrique Sette and Batista, André Ulisses Dantas and Dos Santos Calderon, Patrícia},
title = {Surface Properties, Color Stability, and Bacterial Adhesion of Implant‐Supported Provisional Restorative Materials: In Vitro Study},
journal = {Clinical and Experimental Dental Research},
year = {2026},
volume = {12},
number = {5},
doi = {10.1002/cre2.70461}
}
EUVIMED