EUVIMEDEUVIMED entdecken
VergleichsstudieOpen Access · CC BY 4.0

Comparison of Trueness of Digitally‐ and Conventionally‐Fabricated Mockups

Mehran Falahchai iD, Mahyar Ezzati, Amirreza Hendi iD

Clinical and Experimental Dental Research · 2026

DOI: 10.1002/cre2.70307 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Clinical and Experimental Dental Research, 2026. Verfasst von Mehran Falahchai und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Dental Sciences Research Center, School of Dentistry, Guilan University of Medical Sciences, Rasht, Iran. Hauptthemen laut MEDLINE: Computer-Aided Design, Dental Veneers, Dental Prosthesis Design. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guilan University of Medical Sciences.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

Rising demands for aesthetic outcomes make precise preoperative assessment essential. Despite advances in digital workflows, their accuracy versus conventional techniques remains uncertain. The current study comparatively assessed the trueness of digitally‐ and conventionally‐fabricated mockups. Materials and Methods Fourteen patients needing ceramic veneers in the anterior maxilla participated. Each received three mockups: one fabricated conventionally and two digitally (additive and subtractive). The mockups were placed intraorally and scanned. The scans were superimposed on a reference model to evaluate the accuracy of the entire workflow and on the reference wax‐up to assess production accuracy. Data were analyzed by paired samples test, repeated measures ANOVA, Bonferroni test, and generalized estimating equation (GEE) ( α = 0.05).

Results

For the whole production process, the root mean square (RMS) was 0.13 (0.04) for the conventional method, which was significantly lower than that for the additive as 0.60 (0.07) and subtractive of 0.51 (0.07) digital techniques ( p < 0.001). Also, for the production phase, the mean RMS of different methods was significantly different ( p < 0.001). The conventional method showed the lowest mean by 0.22 (0.07), and the additive technique showed the highest mean by 0.76 (0.02) RMS. The mean RMS was 0.73 (0.02) for the subtractive method.

Conclusions

The trueness of the conventional method was higher than that of the digital method for both the whole production process and the production phase. The conventional method significantly decreases the chairside time especially when tooth surface treatment is not required. The trueness of the subtractive method was higher than that of the additive method.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Computer-Aided DesignDental VeneersDental Prosthesis DesignHumansCeramicsMaxillaModels, DentalEsthetics, Dental

Stichwörter der Autor:innen

computer‐aided designprintingstereolithographythree‐dimensional

Autor:innen und Institutionen

  • Department of Prosthodontics, Dental Sciences Research Center, School of Dentistry, Guilan University of Medical Sciences, Rasht, Iran.
  • Department of Prosthodontics, School of Dentistry, Islamic Azad University of Tehran Medical Sciences, Tehran, Iran.

ORCID-Profile: Mehran Falahchai, Amirreza Hendi

Förderung

  • Guilan University of Medical Sciences

Zitieren

APA

Falahchai, M., Ezzati, M., & Hendi, A. (2026). Comparison of Trueness of Digitally‐ and Conventionally‐Fabricated Mockups. Clinical and Experimental Dental Research. https://doi.org/10.1002/cre2.70307

Vancouver

Falahchai M, Ezzati M, Hendi A. Comparison of Trueness of Digitally‐ and Conventionally‐Fabricated Mockups. Clinical and Experimental Dental Research. 2026. doi:10.1002/cre2.70307

BibTeX
@article{Falahchai2026,
  author = {Falahchai, Mehran and Ezzati, Mahyar and Hendi, Amirreza},
  title = {Comparison of Trueness of Digitally‐ and Conventionally‐Fabricated Mockups},
  journal = {Clinical and Experimental Dental Research},
  year = {2026},
  doi = {10.1002/cre2.70307}
}
Kostenlos starten →