EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of the Presence of Adjacent Tooth and Material Type on the Marginal and Internal Adaptation of Endocrowns Fabricated by the Digital Impression Technique

Mehran Falahchai iD, Fatemeh Razavi Ardekani, Naghme Musapoor, Yasamin Babaee Hemmati, Hamid Neshandar Asli iD

Clinical and Experimental Dental Research · 2025

DOI: 10.1002/cre2.70077 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clinical and Experimental Dental Research, 2025. Verfasst von Mehran Falahchai und 4 weiteren Autor:innen. Beteiligte Einrichtung: Dental Sciences Research Center, Department of Prosthodontics, School of Dentistry, Guilan University of Medical Sciences, Rasht, Iran. Hauptthemen laut MEDLINE: Dental Impression Technique, Dental Marginal Adaptation, Crowns, Dental Materials. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This study was supported by the Guilan University of Medical Sciences (IR.GUMS.REC.1399.562)., Guilan University of Medical Sciences.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

To assess the effects of the presence of adjacent tooth and material type on the marginal and internal adaptation of endocrowns fabricated by the digital impression technique. Material and Methods An endodontically treated molar tooth was used for the fabrication of endocrowns in this in vitro study. Five groups of specimens ( n = 17) were evaluated based on the material type and presence of adjacent tooth: three groups of monolithic zirconia (Zir), lithium disilicate (LDS), and zirconia‐reinforced lithium silicate (ZLS) in the presence of adjacent teeth, and two groups of zirconia endocrowns, one in the absence of an adjacent anterior tooth (second premolar; Zir‐no ant.) and one in the absence of a posterior adjacent tooth (second molar; Zir‐no post.). Marginal and internal adaptation of endocrowns was evaluated by the silicone replica technique. Data were analyzed by ANOVA with Tukey test for pairwise comparisons and generalized estimating equation with Bonferroni correction for pairwise comparisons (α = 0.05).

Results

The largest marginal gap was found in the ZLS, followed by the LDS and Zir groups ( p < 0.05). The Zir group showed significantly higher internal adaptation than the ZLS group ( p < 0.05); LDS had no significant difference with the ZLS and Zir groups ( p > 0.05). The Zir group showed larger marginal and internal gaps than the Zir‐no ant. and Zir‐no post. groups ( p < 0.05); the latter two groups had no significant difference ( p > 0.05). All groups showed the largest gap at the pulpal and the smallest gap at the marginal and cervical areas ( p < 0.05).

Conclusion

Zirconia endocrowns showed the highest marginal and internal adaptation. Digital impression technique in absence of anterior or posterior adjacent tooth would result in higher marginal and internal adaptation of endocrowns.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental Impression TechniqueDental Marginal AdaptationCrownsDental MaterialsHumansZirconiumComputer-Aided DesignDental Prosthesis DesignDental PorcelainMolarIn Vitro TechniquesTooth, Nonvital

Stichwörter der Autor:innen

CAD‐CAMdental internal fitdental marginal adaptationdental material

Substanzen

zirconium oxideZirconiumlithia disilicateDental PorcelainDental Materials

Autor:innen und Institutionen

  • Dental Sciences Research Center, Department of Prosthodontics, School of Dentistry, Guilan University of Medical Sciences, Rasht, Iran.
  • Department of Prosthodontics, School of Dentistry, Yasuj University of Medical Sciences, Yasuj, Iran.
  • Dental Sciences Research Center, Department of Prosthodontics, School of Dentistry, Qazvin University of Medical Sciences, Qazvin, Iran.
  • Dental Sciences Research Center, Department of Orthodontics, School of Dentistry, Guilan University of Medical Sciences, Rasht, Iran.

ORCID-Profile: Mehran Falahchai, Hamid Neshandar Asli

Förderung

  • This study was supported by the Guilan University of Medical Sciences (IR.GUMS.REC.1399.562).
  • Guilan University of Medical Sciences

Zitieren

APA

Falahchai, M., Ardekani, F. R., Musapoor, N., Hemmati, Y. B., & Asli, H. N. (2025). Effects of the Presence of Adjacent Tooth and Material Type on the Marginal and Internal Adaptation of Endocrowns Fabricated by the Digital Impression Technique. Clinical and Experimental Dental Research. https://doi.org/10.1002/cre2.70077

Vancouver

Falahchai M, Ardekani FR, Musapoor N, Hemmati YB, Asli HN. Effects of the Presence of Adjacent Tooth and Material Type on the Marginal and Internal Adaptation of Endocrowns Fabricated by the Digital Impression Technique. Clinical and Experimental Dental Research. 2025. doi:10.1002/cre2.70077

BibTeX
@article{Falahchai2025,
  author = {Falahchai, Mehran and Ardekani, Fatemeh Razavi and Musapoor, Naghme and Hemmati, Yasamin Babaee and Asli, Hamid Neshandar},
  title = {Effects of the Presence of Adjacent Tooth and Material Type on the Marginal and Internal Adaptation of Endocrowns Fabricated by the Digital Impression Technique},
  journal = {Clinical and Experimental Dental Research},
  year = {2025},
  doi = {10.1002/cre2.70077}
}
Kostenlos starten →