EUVIMEDEUVIMED entdecken
Crossref

Electrochemically Anodized FeCoNi Alloy for Oxygen Evolution Reaction in Alkaline Electrolyte

Ya Wang, Chao Li iD, Yan Huang, Jun-E Qu iD

ChemPhysChem · 12.11.2026 · 27 (21)

DOI: 10.1002/cphc.70609 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemPhysChem, online erschienen am 31.10.2026. Verfasst von Ya Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei Key Laboratory of Polymer Materials, School of Materials Scie…. Die Arbeit nennt 62 Literaturangaben. Gefördert von: Overseas Expertise Introduction Center for Discipline Innovation, National Nature Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Most reported FeCoNi ternary composite catalysts are supported, plagued by large catalyst‐substrate interfacial charge–transfer resistance and weak adhesion, necessitating in situ derived catalysts. Herein, an FeCoNi alloy‐based catalytic electrode is fabricated by potentiostatic anodization in an NH 4 F‐containing ethylene glycol (EG)/glycerol (GLY) electrolyte with trace water, followed by cyclic voltammetry (CV) activation in alkaline media. The effects of solvent composition and alloy elemental ratio on oxygen evolution reaction (OER) performance are systematically explored. Under optimized conditions (EG:GLY:H 2 O = 6:4:0.025 by volume, Fe:Co:Ni = 4:3:3 by molar ratio, 30 V anodization for 1 h, and 15 CV cycles), the electrode delivers excellent OER activity in 1 M KOH, with overpotentials of 170/222 mV at 10/100 mA cm −2 , a Tafel slope of 57.45 mV dec −1 , and satisfactory long‐term stability. Anodization forms crystalline fluorides, as well as low‐crystalline F‐layered double hydroxide (F‐LDH) embedded with (Fe, Co, Ni) 3 O 4 spinel nanodomains on the alloy substrate surface. These fluoride species supply abundant preactive sites that are converted into highly active LDH‐type species during CV activation. Meanwhile, the alloy composition tunes the chemical composition, intrinsic activity, morphology, and ECSA of the anodized layer. Optimizing the Fe:Co:Ni ratio is therefore essential for balancing these factors and maximizing the overall OER activity.

Schlagwörter

Stichwörter der Autor:innen

FeCoNi alloycyclic voltammetry activationoxygen evolution reactionpotentiostatic anodization

Autor:innen und Institutionen

  • Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei Key Laboratory of Polymer Materials, School of Materials Science and Engineering, Hubei University, Wuhan, P. R. China.

ORCID-Profile: Chao Li, Jun-E Qu

Förderung

  • Overseas Expertise Introduction Center for Discipline Innovation
  • National Nature Science Foundation of China

Zitieren

APA

Wang, Y., Li, C., Huang, Y., & Qu, J. E. (2026). Electrochemically Anodized FeCoNi Alloy for Oxygen Evolution Reaction in Alkaline Electrolyte. ChemPhysChem, 27(21). https://doi.org/10.1002/cphc.70609

Vancouver

Wang Y, Li C, Huang Y, Qu JE. Electrochemically Anodized FeCoNi Alloy for Oxygen Evolution Reaction in Alkaline Electrolyte. ChemPhysChem. 2026;27(21). doi:10.1002/cphc.70609

BibTeX
@article{Wang2026,
  author = {Wang, Ya and Li, Chao and Huang, Yan and Qu, Jun-E},
  title = {Electrochemically Anodized FeCoNi Alloy for Oxygen Evolution Reaction in Alkaline Electrolyte},
  journal = {ChemPhysChem},
  year = {2026},
  volume = {27},
  number = {21},
  doi = {10.1002/cphc.70609}
}
Kostenlos starten →