Photoreforming Hydrogen From Polystyrene, Low‐Density Polyethylene, and High‐Density Polyethylene Microplastics via UV‐Driven Photolysis and TiO 2 ‐Based Photocatalysis
ChemPhysChem · 29.07.2026 · 27 (14)
DOI: 10.1002/cphc.70502 ↗Kurz gefasst
Fachartikel in der Zeitschrift ChemPhysChem, online erschienen am 26.07.2026. Verfasst von Miroslava Filip Edelmannová und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Environmental Technology, CEET, VSB-Technical University of Ostrava, Ostrava-Poruba, Czech Republic. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerstvo Životního Prostředí, Ministerstvo Školství, Mládeže a Tělovýchovy, Ministry of the Environment of the Czech Republic.
Abstract (Originalsprache)
This study investigated UV‐induced photolysis and photocatalysis in the presence of TiO 2 (Evonik P25) as methods for producing hydrogen from polystyrene (PS), low‐density polyethylene (LDPE), and high‐density polyethylene (HDPE) microplastics. Photolysis showed a strong dependence of reactivity on polymer structure, especially the one‐type LDPE microplastics, exhibiting the highest hydrogen production, while PS showed the lowest activity due to the stability of its aromatic backbone. Although thermodynamic analysis showed the lower Gibbs energy of decomposition for polyethylenes than for PS, all processes remained nonspontaneous. Photocatalysis selectively increased hydrogen production only in PS, where there was an increase of approximately 44% compared with photolysis, which is attributed to favorable polymer–photocatalyst interactions and more efficient charge transfer at the interface. In contrast for polyethylene microplastics, the presence of TiO 2 led to a decrease in hydrogen yields, likely due to limited contact between the microplastics and the photocatalyst and radiation shielding by floating particles. Mixing proved to be a key operating parameter that significantly increases hydrogen production by improving particle dispersion and light distribution. Overall, the results show that the efficiency of microplastic photoreforming is governed by polymer chemistry, morphology, and system hydrodynamics under UV irradiation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Environmental Technology, CEET, VSB-Technical University of Ostrava, Ostrava-Poruba, Czech Republic.
- Department of Chemistry, Faculty of Science, University of Ostrava, Ostrava, Czech Republic.
- Faculty of Materials Science and Technology, VSB-Technical University of Ostrava, Ostrava-Poruba, Czech Republic.
ORCID-Profile: Petr Praus, Lenka Řeháčková
Förderung
- Ministerstvo Životního Prostředí
- Ministerstvo Školství, Mládeže a Tělovýchovy
- Ministry of the Environment of the Czech Republic
- The Ministry of Education, Youth and Sports
Zitieren
APA
Filip Edelmannová, M., Praus, P., Řeháčková, L., Ricka, R., Ritz, M., & Kočí, K. (2026). Photoreforming Hydrogen From Polystyrene, Low‐Density Polyethylene, and High‐Density Polyethylene Microplastics via UV‐Driven Photolysis and TiO 2 ‐Based Photocatalysis. ChemPhysChem, 27(14). https://doi.org/10.1002/cphc.70502
Vancouver
Filip Edelmannová M, Praus P, Řeháčková L, Ricka R, Ritz M, Kočí K. Photoreforming Hydrogen From Polystyrene, Low‐Density Polyethylene, and High‐Density Polyethylene Microplastics via UV‐Driven Photolysis and TiO 2 ‐Based Photocatalysis. ChemPhysChem. 2026;27(14). doi:10.1002/cphc.70502
BibTeX
@article{FilipEdelmannov2026,
author = {Filip Edelmannová, Miroslava and Praus, Petr and Řeháčková, Lenka and Ricka, Rudolf and Ritz, Michal and Kočí, Kamila},
title = {Photoreforming Hydrogen From Polystyrene, Low‐Density Polyethylene, and High‐Density Polyethylene Microplastics via UV‐Driven Photolysis and TiO 2 ‐Based Photocatalysis},
journal = {ChemPhysChem},
year = {2026},
volume = {27},
number = {14},
doi = {10.1002/cphc.70502}
}
EUVIMED