EUVIMEDEUVIMED entdecken
Crossref

Functional and Structural Analysis of Auxetic Metamaterial Stent Designs for Thoracic Aortic Aneurysms Using Finite Element Simulation

Yung-Chang Lu, Lin-I Hsu, Chih-Feng Lin, Chi-Pin Hsu, Ting-Kuo Chang, Tsung-Yu Lin, Chang-Hung Huang

International Journal for Numerical Methods in Biomedical Engineering · 2026-07 · 42 (7)

DOI: 10.1002/cnm.70195 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, online erschienen am 02.07.2026. Verfasst von Yung-Chang Lu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Medical Research, MacKay Memorial Hospital, Biomechanics Research Laboratory, Taipei, Taiwan. Hauptthemen laut MEDLINE: Stents, Aortic Aneurysm, Thoracic, Prosthesis Design. Die Arbeit nennt 53 Literaturangaben. Gefördert von: National Science and Technology Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thoracic aortic aneurysms often require large‐diameter stent grafts; however, conventional designs exhibit poor wall apposition and limited adaptability to complex anatomies. Although auxetic metamaterials with a negative Poisson's ratio show promise for stent applications, the optimal design configuration remains unclear. Therefore, this study aimed to compare the mechanical performance of different auxetic stent designs and identify the most suitable configuration. Quasi‐static experimental tests were conducted for validation, alongside finite element (FE) simulations under clinically relevant loading conditions, including parallel compression, radial compression, and radial expansion, to evaluate deployment behavior. Four auxetic designs, including rotating square (RS), re‐entrant (RE), peanut (PN), and rotating triangle (RT), were investigated using magnesium alloy specimens. The results show that auxetic geometry significantly affects recoiling, stiffness, and deformation. The RT design demonstrated a more balanced mechanical response under the current evaluation criteria, with substantially lower radial stiffness (6291 N/m), representing an 84%–97% reduction compared to the other designs, and moderate foreshortening (7.10%), lower than RE (13.62%) and PN (9.61%) while comparable to RS (5.49%). Despite exhibiting a relatively higher recoil, these findings suggest its potential for controlled deployment and stable apposition.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

StentsAortic Aneurysm, ThoracicProsthesis DesignFinite Element AnalysisHumansStress, MechanicalComputer Simulation

Stichwörter der Autor:innen

auxetic metamaterialsfinite element analysisstent mechanical performancethoracic aortic aneurysms

Autor:innen und Institutionen

  • Department of Medical Research, MacKay Memorial Hospital, Biomechanics Research Laboratory, Taipei, Taiwan.
  • Department of Medicine, MacKay Medical University, New Taipei City, Taiwan.
  • Department of Physical Therapy and Assistive Technology, National Yang Ming Chiao Tung University, Taipei, Taiwan.
  • Department of Otolaryngology, National Taiwan University Hospital, Taipei, Taiwan.
  • Department of Mechanical Engineering, Ming Chi University of Technology, New Taipei City, Taiwan.
  • School of Dentistry, National Yang Ming Chiao Tung University, Taipei, Taiwan.

Förderung

  • National Science and Technology Council

Zitieren

APA

Lu, Y. C., Hsu, L. I., Lin, C. F., Hsu, C. P., Chang, T. K., Lin, T. Y., & Huang, C. H. (2026). Functional and Structural Analysis of Auxetic Metamaterial Stent Designs for Thoracic Aortic Aneurysms Using Finite Element Simulation. International Journal for Numerical Methods in Biomedical Engineering, 42(7). https://doi.org/10.1002/cnm.70195

Vancouver

Lu YC, Hsu LI, Lin CF, Hsu CP, Chang TK, Lin TY, et al. Functional and Structural Analysis of Auxetic Metamaterial Stent Designs for Thoracic Aortic Aneurysms Using Finite Element Simulation. International Journal for Numerical Methods in Biomedical Engineering. 2026;42(7). doi:10.1002/cnm.70195

BibTeX
@article{Lu2026,
  author = {Lu, Yung-Chang and Hsu, Lin-I and Lin, Chih-Feng and Hsu, Chi-Pin and Chang, Ting-Kuo and Lin, Tsung-Yu and Huang, Chang-Hung},
  title = {Functional and Structural Analysis of Auxetic Metamaterial Stent Designs for Thoracic Aortic Aneurysms Using Finite Element Simulation},
  journal = {International Journal for Numerical Methods in Biomedical Engineering},
  year = {2026},
  volume = {42},
  number = {7},
  doi = {10.1002/cnm.70195}
}
Kostenlos starten →