Implant Abutment Screw Loosening: Biomechanical Analysis of Bruxism‐Induced Mesiodistal Loads With FEA and Their Effect on Shear Stress
International Journal for Numerical Methods in Biomedical Engineering · 2026-04 · 42 (4)
DOI: 10.1002/cnm.70174 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, online erschienen am 20.04.2026. Verfasst von Zeynep Canan Karip und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Graduate School of Natural and Applied Sciences, İzmir Bakircay University, İzmir, Turkey. Hauptthemen laut MEDLINE: Biomechanical Phenomena, Bruxism, Bone Screws, Stress, Mechanical. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben.
Abstract (Originalsprache)
Abutment screw loosening in dental implant systems is one of the most common causes of long‐term clinical failure. This study investigated the biomechanical effects of bruxism‐induced mesiodistal loads on shear stress and screw loosening tendency at the implant‐abutment connection using finite element analysis. In this study, a titanium alloy (Ti6Al4V) implant‐abutment‐screw system was three‐dimensionally modeled, and mesiodistal loads (23.4, 128, and 234 N), representing mesiodistal forces, were applied. The friction coefficient between the contact surfaces was defined, and the screw preload and load transfer mechanism were analyzed. The results showed that shear stress in the connection area increased significantly with increasing mesiodistal loads, and that loads applied in a mesiodistal direction caused microrotation in the screw connection, increasing the risk of loosening. These findings emphasize the need to optimize load, screw preload, and connection geometry in implant design for individuals with bruxism and provide a scientific basis for material and design improvements to prevent screw loosening clinically.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Biomedical Engineering, Graduate School of Natural and Applied Sciences, İzmir Bakircay University, İzmir, Turkey.
- Department of Biomedical Engineering, Engineering and Architecture Faculty, Izmir Bakırcay University, İzmir, Turkey.
ORCID-Profile: Kadir Gök
Zitieren
APA
Karip, Z. C., & Gök, K. (2026). Implant Abutment Screw Loosening: Biomechanical Analysis of Bruxism‐Induced Mesiodistal Loads With FEA and Their Effect on Shear Stress. International Journal for Numerical Methods in Biomedical Engineering, 42(4). https://doi.org/10.1002/cnm.70174
Vancouver
Karip ZC, Gök K. Implant Abutment Screw Loosening: Biomechanical Analysis of Bruxism‐Induced Mesiodistal Loads With FEA and Their Effect on Shear Stress. International Journal for Numerical Methods in Biomedical Engineering. 2026;42(4). doi:10.1002/cnm.70174
BibTeX
@article{Karip2026,
author = {Karip, Zeynep Canan and Gök, Kadir},
title = {Implant Abutment Screw Loosening: Biomechanical Analysis of Bruxism‐Induced Mesiodistal Loads With FEA and Their Effect on Shear Stress},
journal = {International Journal for Numerical Methods in Biomedical Engineering},
year = {2026},
volume = {42},
number = {4},
doi = {10.1002/cnm.70174}
}
EUVIMED