EUVIMEDEUVIMED entdecken
Crossref

Towards a Model of Thrombus Embolization: Structural Response and Failure of Blood Clots Through Peridynamics

Abhishek Karmakar iD, Greg W Burgreen iD, Olivier Desjardins iD, James F Antaki iD

International Journal for Numerical Methods in Biomedical Engineering · 2025

DOI: 10.1002/cnm.70118 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, 2025. Verfasst von Abhishek Karmakar und 3 weiteren Autor:innen. Beteiligte Einrichtung: Meining School of Biomedical Engineering, Cornell University, Ithaca, New York, USA. Hauptthemen laut MEDLINE: Thrombosis, Models, Cardiovascular. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: NIH HHS, National Institutes of Health.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite the high mortality rates associated with thromboembolic diseases, computational modeling of the physics of thromboembolism remains underdeveloped in the literature due to the inadequacy of classical finite element methods to accommodate the growth, large deformation, and fracture of blood clots, especially under the influence of fluid dynamic forces. Accordingly, we present a meshless numerical framework, employing peridynamics (PD) that readily captures the constitutive response, damage progression, and eventual failure of a blood clot. The PD framework was validated against three benchmark test cases: tensile loading of a plate with a hole, torsional loading of a column, and tensile loading of thin structural plates both with and without notches. Comparative quantitative and qualitative analysis demonstrated excellent agreement with finite element solutions generated using the commercial software ANSYS. The validated framework was then used to calibrate the peridynamic parameters to accurately reproduce the mechanical response, the cohesive bulk fracture of blood clots under tensile loading, and the debonding of blood clots from artificial surfaces, including titanium (Ti), polyurethane (PU), and polytetrafluoroethylene (PTFE). Force–displacement curves obtained using these calibrated parameters demonstrated a strong correlation with experimental data.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ThrombosisModels, CardiovascularHumansFinite Element AnalysisTensile StrengthComputer SimulationStress, Mechanical

Stichwörter der Autor:innen

Ogden modelblood clotsfracture mechanicsmeshlessperidynamicsthromboembolism

Autor:innen und Institutionen

  • Meining School of Biomedical Engineering, Cornell University, Ithaca, New York, USA.
  • Center for Advanced Vehicular Systems, Mississippi State University, Starkville, Mississippi, USA.
  • Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, New York, USA.

ORCID-Profile: Abhishek Karmakar, Greg W Burgreen, Olivier Desjardins, James F Antaki

Förderung

  • NIH HHS
  • National Institutes of Health

Zitieren

APA

Karmakar, A., Burgreen, G. W., Desjardins, O., & Antaki, J. F. (2025). Towards a Model of Thrombus Embolization: Structural Response and Failure of Blood Clots Through Peridynamics. International Journal for Numerical Methods in Biomedical Engineering. https://doi.org/10.1002/cnm.70118

Vancouver

Karmakar A, Burgreen GW, Desjardins O, Antaki JF. Towards a Model of Thrombus Embolization: Structural Response and Failure of Blood Clots Through Peridynamics. International Journal for Numerical Methods in Biomedical Engineering. 2025. doi:10.1002/cnm.70118

BibTeX
@article{Karmakar2025,
  author = {Karmakar, Abhishek and Burgreen, Greg W and Desjardins, Olivier and Antaki, James F},
  title = {Towards a Model of Thrombus Embolization: Structural Response and Failure of Blood Clots Through Peridynamics},
  journal = {International Journal for Numerical Methods in Biomedical Engineering},
  year = {2025},
  doi = {10.1002/cnm.70118}
}
Kostenlos starten →