EUVIMEDEUVIMED entdecken
Crossref

Numerical Performance Analysis: Examination of hA , hBN , ZrO 2 , and Al 2 O 3 Coatings Applied to 316L Stainless Schanz Screws for Intertrochanteric Fractures by Finite Element Analysis

Cengizhan Kurt, Levent Urtekin, Arif Gok iD, Sermet İnal, Kadir Gok

International Journal for Numerical Methods in Biomedical Engineering · 2025-11 · 41 (11)

DOI: 10.1002/cnm.70116 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, online erschienen am 20.11.2025. Verfasst von Cengizhan Kurt und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedics and Traumatology, İzmir Bakircay University, İzmir, Turkey. Hauptthemen laut MEDLINE: Finite Element Analysis, Zirconium, Aluminum Oxide, Bone Screws. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 25 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the biomechanical performance of four different coating materials applied on 316L stainless steel Schanz screws used in the treatment of intertrochanteric fractures (ITF) was examined by finite element analysis (FEA). Coatings: hydroxyapatite (hA), hexagonal boron nitride (hBN), zirconium dioxide (ZrO 2 ), and aluminum oxide (Al 2 O 3 ). How these coatings affect the mechanical properties, durability, and biocompatibility of screws reveals the potential to increase the effectiveness of external fixators. Analyses aim to make recommendations for safer and more effective applications during the treatment process by examining the effects of each coating on stress distribution, deformation and stress parameters. Ultimately, the most suitable material selection for fracture healing depends on clinical needs and the patient's condition. If high stress transmission is required, 316L or 316L‐hA may be preferred. If more stable and low shear performance is desired, 316L‐ZrO 2 or 316L‐Al 2 O 3 coatings might be considered. In any case, it is essential to take all parameters into account when choosing the material.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Finite Element AnalysisZirconiumAluminum OxideBone ScrewsDurapatiteBoron CompoundsStainless SteelHip FracturesCoated Materials, BiocompatibleHumansMaterials TestingStress, Mechanical

Stichwörter der Autor:innen

Al2O3Schanz screwZrO2hAhBNintertrochanteric fractures (ITFs)pertrochanteric fixator (PTF)

Substanzen

ZirconiumAluminum Oxidezirconium oxideDurapatiteBoron CompoundsStainless Steelboron nitrideCoated Materials, Biocompatible

Autor:innen und Institutionen

  • Department of Orthopaedics and Traumatology, İzmir Bakircay University, İzmir, Turkey.
  • Department of Mechanical Engineering, Kirsehir Ahi Evran University, Kırşehir, Turkey.
  • Department of Industrial Design, Kutahya Dumlupinar University, Kutahya, Turkey.
  • Department of Biomedical Engineering, Izmir Bakırcay University, İzmir, Turkey.

ORCID-Profile: Arif Gok

Zitieren

APA

Kurt, C., Urtekin, L., Gok, A., İnal, S., & Gok, K. (2025). Numerical Performance Analysis: Examination of hA , hBN , ZrO 2 , and Al 2 O 3 Coatings Applied to 316L Stainless Schanz Screws for Intertrochanteric Fractures by Finite Element Analysis. International Journal for Numerical Methods in Biomedical Engineering, 41(11). https://doi.org/10.1002/cnm.70116

Vancouver

Kurt C, Urtekin L, Gok A, İnal S, Gok K. Numerical Performance Analysis: Examination of hA , hBN , ZrO 2 , and Al 2 O 3 Coatings Applied to 316L Stainless Schanz Screws for Intertrochanteric Fractures by Finite Element Analysis. International Journal for Numerical Methods in Biomedical Engineering. 2025;41(11). doi:10.1002/cnm.70116

BibTeX
@article{Kurt2025,
  author = {Kurt, Cengizhan and Urtekin, Levent and Gok, Arif and İnal, Sermet and Gok, Kadir},
  title = {Numerical Performance Analysis: Examination of hA , hBN , ZrO 2 , and Al 2 O 3 Coatings Applied to 316L Stainless Schanz Screws for Intertrochanteric Fractures by Finite Element Analysis},
  journal = {International Journal for Numerical Methods in Biomedical Engineering},
  year = {2025},
  volume = {41},
  number = {11},
  doi = {10.1002/cnm.70116}
}
Kostenlos starten →