Modeling Fibrin Accumulation on Flow‐Diverting Devices for Intracranial Aneurysms
International Journal for Numerical Methods in Biomedical Engineering · 2024
DOI: 10.1002/cnm.3883 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, 2024. Verfasst von Juan R Cebral und 8 weiteren Autor:innen. Beteiligte Einrichtung: Bioengineering Department, George Mason University, Fairfax, Virginia, USA. Hauptthemen laut MEDLINE: Intracranial Aneurysm, Fibrin. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NINDS NIH HHS, National Institutes of Health.
Abstract (Originalsprache)
The mechanisms leading to aneurysm occlusion after treatment with flow‐diverting devices are not fully understood. Flow modification induces thrombus formation within the aneurysm cavity, but fibrin can simultaneously accumulate and cover the device scaffold, leading to further flow modification. However, the interplay and relative importance of these processes are not clearly understood. A computational model of fibrin accumulation and flow modification after flow diversion treatment of cerebral aneurysms has been developed under the guidance of in vitro experiments and observations. The model is based on the loose coupling of flow and transport‐reaction equations that are solved separately by independent codes. Interaction or reactive terms account for thrombin production from prothrombin stimulated by thrombogenic metallic wires and inhibition by antithrombin as well as fibrin production from fibrinogen stimulated by thrombin and flow shear stress, and fibrin adhesion to device wires and already attached fibrin. The computational model was demonstrated and tested on idealized vessel and aneurysm geometries. The model was able to reproduce the salient features of fibrin accumulation after the deployment of flow‐diverting devices in idealized in vitro models of cerebral aneurysms. Namely, fibrin production in regions of high shear stress, initial accumulation at the inflow zone, and progressive occlusion of the device and corresponding flow attenuation. The computational model linking flow dynamics to fibrin production, transport, and adhesion can be used to investigate and better understand the effects that lead to fibrin accumulation and the resulting aneurysm inflow reduction and intra‐aneurysmal flow modulation.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Bioengineering Department, George Mason University, Fairfax, Virginia, USA.
- Physics Department, George Mason University, Fairfax, Virginia, USA.
- Department of Radiology, Mayo Clinic, Rochester, Minnesota, USA.
- Department of Neurosurgery, Mayo Clinic, Rochester, Minnesota, USA.
ORCID-Profile: Juan R Cebral, Fernando Mut, Rainald Löhner, Laurel Marsh, Alireza Chitsaz, Esref Bayraktar
Förderung
- NINDS NIH HHS
- National Institutes of Health
Zitieren
APA
Cebral, J. R., Mut, F., Löhner, R., Marsh, L., Chitsaz, A., Bilgin, C., Bayraktar, E., Kallmes, D., & Kadirvel, R. (2024). Modeling Fibrin Accumulation on Flow‐Diverting Devices for Intracranial Aneurysms. International Journal for Numerical Methods in Biomedical Engineering. https://doi.org/10.1002/cnm.3883
Vancouver
Cebral JR, Mut F, Löhner R, Marsh L, Chitsaz A, Bilgin C, et al. Modeling Fibrin Accumulation on Flow‐Diverting Devices for Intracranial Aneurysms. International Journal for Numerical Methods in Biomedical Engineering. 2024. doi:10.1002/cnm.3883
BibTeX
@article{Cebral2024,
author = {Cebral, Juan R and Mut, Fernando and Löhner, Rainald and Marsh, Laurel and Chitsaz, Alireza and Bilgin, Cem and Bayraktar, Esref and Kallmes, David and Kadirvel, Ramanathan},
title = {Modeling Fibrin Accumulation on Flow‐Diverting Devices for Intracranial Aneurysms},
journal = {International Journal for Numerical Methods in Biomedical Engineering},
year = {2024},
doi = {10.1002/cnm.3883}
}
EUVIMED