EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Minimizing Solvent Residues in CsPbI 1.5 Br 1.5 Perovskite Films for Efficient Ultra‐Wide Bandgap Solar Cells

Tao Dong, Chenxu Shen, Boyang Yu, Shengyang Zhao, Haoyu Wu, Chenyuan Ding, Binkai Shi, Ziyu Cai, Wenzheng Hu, Biyun Shi, Feng Ye, Qiufeng Ye und 1 weitere

Carbon Neutralization · 2025-11 · 4 (6)

DOI: 10.1002/cnl2.70061 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Carbon Neutralization, online erschienen am 06.10.2025. Verfasst von Tao Dong und 12 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As an intermediate composition between CsPbI 2 Br and CsPbIBr 2 , the inorganic perovskite material CsPbI 1.5 Br 1.5 is expected to exhibit both high efficiency and enhanced stability, attracting significant attention. However, as a Br‐rich perovskite, CsPbI 1.5 Br 1.5 suffers from poor film quality, primarily due to the substantial disparity in solvent evaporation rates and nucleation growth kinetics of the precursor films. This leads to severe non‐radiative recombination, closely related to the larger open‐circuit voltage loss ( V OC loss) and lower efficiencies compared to mainstream inorganic perovskites (e.g., CsPbI 3 and CsPbI 2 Br). To address these issues, we employed a Sequential Extraction Vacuum Method (SEVM), which integrates antisolvent extraction with vacuum treatment, to minimize solvent residues in perovskite films. This approach promotes grain densification, mitigates pinhole formation, and enhances film coverage, thereby significantly inhibiting non‐radiative recombination. Following SEVM treatment, the champion device achieved a power conversion efficiency (PCE) of 14.29% and a V OC of 1.336 V, representing the highest PCE and smallest V OC loss for ultra‐wide bandgap (> 1.95 eV) inorganic perovskite solar cells (PSCs). Furthermore, the SEVM‐based PSCs retained 90% of their initial PCE after 500 h of unencapsulated storage.

Zitieren

APA

Dong, T., Shen, C., Yu, B., Zhao, S., Wu, H., Ding, C., Shi, B., Cai, Z., Hu, W., Shi, B., Ye, F., Ye, Q., & Fang, Z. (2025). Minimizing Solvent Residues in CsPbI 1.5 Br 1.5 Perovskite Films for Efficient Ultra‐Wide Bandgap Solar Cells. Carbon Neutralization, 4(6). https://doi.org/10.1002/cnl2.70061

Vancouver

Dong T, Shen C, Yu B, Zhao S, Wu H, Ding C, et al. Minimizing Solvent Residues in CsPbI 1.5 Br 1.5 Perovskite Films for Efficient Ultra‐Wide Bandgap Solar Cells. Carbon Neutralization. 2025;4(6). doi:10.1002/cnl2.70061

BibTeX
@article{Dong2025,
  author = {Dong, Tao and Shen, Chenxu and Yu, Boyang and Zhao, Shengyang and Wu, Haoyu and Ding, Chenyuan and Shi, Binkai and Cai, Ziyu and Hu, Wenzheng and Shi, Biyun and Ye, Feng and Ye, Qiufeng and Fang, Zebo},
  title = {Minimizing Solvent Residues in CsPbI 1.5 Br 1.5 Perovskite Films for Efficient Ultra‐Wide Bandgap Solar Cells},
  journal = {Carbon Neutralization},
  year = {2025},
  volume = {4},
  number = {6},
  doi = {10.1002/cnl2.70061}
}
Kostenlos starten →