Localized Energy Absorption through LaB 6 Surface Modification of PA12 Enables Enhanced Tensile Performance in Diode Laser PBF‐LB
Chemistry–Methods · 2025-12 · 5 (12)
DOI: 10.1002/cmtd.202500101 ↗Kurz gefasst
Fachartikel in der Zeitschrift Chemistry–Methods, 2025-10. Verfasst von Nadine Stratmann und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: DFG.
Abstract (Originalsprache)
The shift to energy‐efficient near‐infrared (NIR) diode lasers in polymer powder bed fusion (PBF‐LB/P) challenges standard polymer powders due to insufficient NIR absorption and necessitates tailored feedstock modifications. This study explores the potential of surface modification (s‐mod) of polyamide 12 (PA12) with LaB 6 nanoparticles (NP) as a scalable alternative to conventional volume modification (v‐mod) with carbon black (CB). Despite a tenfold lower overall NIR absorbance, s‐mod PA12 achieves comparable melting behavior with only a 1.5‐fold increase in laser energy. Combined differential scanning calorimetry (DSC) and X‐ray diffraction (XRD) analyses reveal that surface‐localized absorption enables partial retention of α ‐domains at intermediate energy densities, consistent with a heterogeneous, surface‐dominated melting mechanism. At higher energies, s‐mod and v‐mod converge to fully γ ‐phase materials with comparable crystallinity. Mechanical testing demonstrates that intermediate s‐mod parts exhibit higher crystallinity, whereas fully molten s‐mod parts outperform v‐mod counterparts in tensile strength while maintaining ductility. Our findings indicate that s‐mod PA12 not only matches the processability of industrial v‐mod powders but also introduces new degrees of freedom for tailoring mechanical properties via controlled melting. Decoupling energy absorption from volumetric filler loading expands the material design space for NIR‐based additive manufacturing and paving the way for next‐generation, high‐performance polymer components.
Förderung
- DFG
Zitieren
APA
Stratmann, N., Willeke, M., Leupold, S., Loza, K., Lüddecke, A., Kwade, A., Schmidt, M., Barcikowski, S., & Ziefuss, A. R. (2025). Localized Energy Absorption through LaB 6 Surface Modification of PA12 Enables Enhanced Tensile Performance in Diode Laser PBF‐LB. Chemistry–Methods, 5(12). https://doi.org/10.1002/cmtd.202500101
Vancouver
Stratmann N, Willeke M, Leupold S, Loza K, Lüddecke A, Kwade A, et al. Localized Energy Absorption through LaB 6 Surface Modification of PA12 Enables Enhanced Tensile Performance in Diode Laser PBF‐LB. Chemistry–Methods. 2025;5(12). doi:10.1002/cmtd.202500101
BibTeX
@article{Stratmann2025,
author = {Stratmann, Nadine and Willeke, Michael and Leupold, Simon and Loza, Kateryna and Lüddecke, Arne and Kwade, Arno and Schmidt, Michael and Barcikowski, Stephan and Ziefuss, Anna Rosa},
title = {Localized Energy Absorption through LaB 6 Surface Modification of PA12 Enables Enhanced Tensile Performance in Diode Laser PBF‐LB},
journal = {Chemistry–Methods},
year = {2025},
volume = {5},
number = {12},
doi = {10.1002/cmtd.202500101}
}
EUVIMED