Enhancement of the Mechanical Properties of Electrodeposited Copper Foil Reinforced by Bis(3‐Sulfopropyl) Disulfide Additive
cMat · 2026-03 · 3 (1)
DOI: 10.1002/cmt2.70031 ↗Kurz gefasst
Fachartikel in der Zeitschrift cMat, online erschienen am 19.03.2026. Verfasst von Jian Huang und 10 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Enhancing the performance of lithium‐ion batteries critically depends on developing copper foil with superior mechanical properties. Additives provide a direct and effective strategy for tailoring these properties. This study examines the incorporation of bis(3‐sulfonopropyl) disulfide (SPS) as an additive to modulate the performance of electrodeposited copper foil and elucidates its underlying mechanism. The experimental results indicate that the addition of 12 mg L −1 SPS yields the copper foil with a tensile strength of 498.6 MPa and an elongation of 3.6%. Microstructural analysis reveals that SPS enhances strength by promoting the formation of finer twins and increasing dislocation density, whereas ductility is improved through the reinforcement of the (200) crystallographic texture. Furthermore, the incorporation of SPS increases the surface energy of the copper foil, which acts as the primary driving force for internal twin refinement and dislocation proliferation. These findings provide a theoretical basis for a deeper understanding of SPS's role in electrodeposition, thereby contributing to the optimization of copper foil performance.
Zitieren
APA
Huang, J., Sun, X., Xiao, K., Chen, M., Huang, Y., Hu, X., Tan, Y., Tian, F., Song, N., Fan, X., & Tang, Y. (2026). Enhancement of the Mechanical Properties of Electrodeposited Copper Foil Reinforced by Bis(3‐Sulfopropyl) Disulfide Additive. cMat, 3(1). https://doi.org/10.1002/cmt2.70031
Vancouver
Huang J, Sun X, Xiao K, Chen M, Huang Y, Hu X, et al. Enhancement of the Mechanical Properties of Electrodeposited Copper Foil Reinforced by Bis(3‐Sulfopropyl) Disulfide Additive. cMat. 2026;3(1). doi:10.1002/cmt2.70031
BibTeX
@article{Huang2026,
author = {Huang, Jian and Sun, Xiaohui and Xiao, Ke and Chen, Mingwei and Huang, Yanle and Hu, Xiwu and Tan, Yuhui and Tian, Fengqi and Song, Ning and Fan, Xiaowei and Tang, Yunzhi},
title = {Enhancement of the Mechanical Properties of Electrodeposited Copper Foil Reinforced by Bis(3‐Sulfopropyl) Disulfide Additive},
journal = {cMat},
year = {2026},
volume = {3},
number = {1},
doi = {10.1002/cmt2.70031}
}
EUVIMED