EUVIMEDEUVIMED entdecken
Crossref

Lead free CsSn 0 . 5 Ge 0 . 5 I 3 perovskite solar cell with different layer properties via SCAPS‐1D simulation

Xiaoya Liu, Tong Li, Liangsheng Hao, Jiang Wu, Yang Ling, Zaiguo Fu, Fanghe Zhou, Xin Zhang, Yihao Liu, Cheng Zhang

The Canadian Journal of Chemical Engineering · 2023-12 · 101 (12) · 6792-6806

DOI: 10.1002/cjce.25009 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Canadian Journal of Chemical Engineering, online erschienen am 05.06.2023. Verfasst von Xiaoya Liu und 9 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 69 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Science and Technology Commission of Shanghai Municipality.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Organic–inorganic halide perovskite solar cells (PSCs) have been extensively studied due to their simple fabrication methods and obvious device efficiency advantages. In this work, the perovskite CsSn 0.5 Ge 0.5 I 3 is used as the light absorption layer, which is doped with Ge 2+ in CsSnI 3 to improve its stability. The polymers of 3‐hexylthiophene (P3HT) with excellent optoelectronic properties and low price, and SnO 2 with high electron extraction ability is selected as charge transport layers. Based on these, a novel PSC structure (FTO/SnO 2 /IDL1/CsSn 0.5 Ge 0.5 I 3 /IDL2/P3HT/Au) has been simulated via solar cell capacitor simulator (SCAPS‐1D). The PSC performance is optimized by adjusting a series of parameters, including the layer thickness, defect density, electron affinity potential energy, and operating temperature, and so forth. The results show that the PSC defects are passivated by adjusting the appropriate parameters, and the final optimized open circuit voltage ( V OC ) is 1.08 V, short‐circuit current density ( J SC ) is 27.37 mA/cm 2 , fill factor (FF) is 83.32%, while the power conversion efficiency (PCE) is increased from the initial 10.89% to 24.63%, which provides theoretical reference for experiments and new ideas for the preparation and development of efficient and environmentally friendly PSCs. Finally, the effect of different metal cathodes with and without hole transport layer (HTL) on PSC performance is compared. The PSCs without HTL are more dependent on battery cathodes, which provided a way to replace precious metals with other electrode materials.

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Commission of Shanghai Municipality

Zitieren

APA

Liu, X., Li, T., Hao, L., Wu, J., Ling, Y., Fu, Z., Zhou, F., Zhang, X., Liu, Y., & Zhang, C. (2023). Lead free CsSn 0 . 5 Ge 0 . 5 I 3 perovskite solar cell with different layer properties via SCAPS‐1D simulation. The Canadian Journal of Chemical Engineering, 101(12), 6792-6806. https://doi.org/10.1002/cjce.25009

Vancouver

Liu X, Li T, Hao L, Wu J, Ling Y, Fu Z, et al. Lead free CsSn 0 . 5 Ge 0 . 5 I 3 perovskite solar cell with different layer properties via SCAPS‐1D simulation. The Canadian Journal of Chemical Engineering. 2023;101(12):6792-6806. doi:10.1002/cjce.25009

BibTeX
@article{Liu2023,
  author = {Liu, Xiaoya and Li, Tong and Hao, Liangsheng and Wu, Jiang and Ling, Yang and Fu, Zaiguo and Zhou, Fanghe and Zhang, Xin and Liu, Yihao and Zhang, Cheng},
  title = {Lead free CsSn 0 . 5 Ge 0 . 5 I 3 perovskite solar cell with different layer properties via SCAPS‐1D simulation},
  journal = {The Canadian Journal of Chemical Engineering},
  year = {2023},
  volume = {101},
  number = {12},
  pages = {6792--6806},
  doi = {10.1002/cjce.25009}
}
Kostenlos starten →