Design framework for dimethyl ether ( DME) production from coal and biomass‐derived syngas via simulation approach
The Canadian Journal of Chemical Engineering · 2023-06 · 101 (6) · 3213-3225
DOI: 10.1002/cjce.24906 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Canadian Journal of Chemical Engineering, online erschienen am 10.04.2023. Verfasst von Komal Tripathi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: Ministry of Human Resource Development.
Abstract (Originalsprache)
A comprehensive thermodynamic study was conducted to evaluate the comparative efficacy of methanol and dimethyl ether (DME) synthesis using CO 2 rich syngas feed. The first part of our study included assessing the relative performances of the methanol synthesis system, two step DME synthesis system, and one step DME synthesis system in terms of the CO x conversion and product yield (methanol/DME) based on the Gibbs free energy minimization approach. The wide range of composition of CO 2 ‐enriched syngas feed produced by the coal and biomass gasification was simulated using Aspen Plus and the following evaluation parameters were analyzed for a broad parameter range: reaction temperature (180–280°C), reaction pressure (10–80 bar), stoichiometry number (SN) (0–11), and CO 2 /(CO 2 + CO) molar feed ratio (0–1) for isothermal as well as adiabatic conditions. Based on the equilibrium yield, one‐step DME synthesis was discovered as the most viable process to utilize the co‐gasification derived syngas effectively. In the second part of our study, the overall process efficiency was inspected through the process design of 1 tonnes per day (TPD) DME plant inclusive of heat integration, resulting in significant CO 2 abatement and DME production with high product purity and minimum energy consumption. Consequently, one‐step DME production via CO 2 ‐enriched syngas obtained through the coal or biomass gasification process is identified as the leading technology based on energy utilization and CO 2 abatement.
Förderung
- Ministry of Human Resource Development
Zitieren
APA
Tripathi, K., Gupta, V., Awasthi, V., Pant, K. K., & Upadhyayula, S. (2023). Design framework for dimethyl ether ( DME) production from coal and biomass‐derived syngas via simulation approach. The Canadian Journal of Chemical Engineering, 101(6), 3213-3225. https://doi.org/10.1002/cjce.24906
Vancouver
Tripathi K, Gupta V, Awasthi V, Pant KK, Upadhyayula S. Design framework for dimethyl ether ( DME) production from coal and biomass‐derived syngas via simulation approach. The Canadian Journal of Chemical Engineering. 2023;101(6):3213-3225. doi:10.1002/cjce.24906
BibTeX
@article{Tripathi2023,
author = {Tripathi, Komal and Gupta, Vrinda and Awasthi, Varsha and Pant, Kamal Kishore and Upadhyayula, Sreedevi},
title = {Design framework for dimethyl ether ( DME) production from coal and biomass‐derived syngas via simulation approach},
journal = {The Canadian Journal of Chemical Engineering},
year = {2023},
volume = {101},
number = {6},
pages = {3213--3225},
doi = {10.1002/cjce.24906}
}
EUVIMED