Prediction of critical total drawdown in sand production from gas wells: Machine learning approach
The Canadian Journal of Chemical Engineering · 2023-05 · 101 (5) · 2493-2509
DOI: 10.1002/cjce.24640 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Canadian Journal of Chemical Engineering, online erschienen am 02.11.2022. Verfasst von Fahd Saeed Alakbari und 6 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Sand production is a critical issue in petroleum wells. The critical total drawdown (CTD) is an essential indicator of the onset of sand production. Although some models are available for CTD prediction, most of them are proven to lack accuracy or use commercial software. Furthermore, the previous correlations have not studied the trend analysis to verify the correct relationships between the parameters. Therefore, this study aims to build accurate and robust models for predicting CTD using response surface methodology (RSM) and support vector machine (SVM). The RSM is utilized to obtain the equation without using any software. The SVM model is an alternative method to predict the CTD with higher accuracy. This study used 23 datasets to develop the proposed models. The CTD is a strong function of the total vertical depth, cohesive strength, effective overburden vertical stress, and transit time with correlation coefficients ( R ) of 0.968, 0.963, 0.918, and −0.813. Different statistical methods, that is, analysis of variance (ANOVA), F ‐statistics test, fit statistics, and diagnostics plots, have shown that the RSM correlation has high accuracy and is more robust than correlations reported in the literature. Moreover, trend analysis has proven that the proposed models ideally follow the correct trend. The RSM correlation decreased the average absolute percent relative error (AAPRE) by 12.7% compared to all published correlations' AAPRE of 22.6%–30.4%. The SVM model has shown the lowest AAPRE of 6.1%, with the highest R of 0.995. The effects of all independent variables on the CTD are displayed in three‐dimensional plots and showed significant interactions.
Zitieren
APA
Alakbari, F. S., Mohyaldinn, M. E., Ayoub, M. A., Muhsan, A. S., Abdulkadir, S. J., Hussein, I. A., & Salih, A. A. (2023). Prediction of critical total drawdown in sand production from gas wells: Machine learning approach. The Canadian Journal of Chemical Engineering, 101(5), 2493-2509. https://doi.org/10.1002/cjce.24640
Vancouver
Alakbari FS, Mohyaldinn ME, Ayoub MA, Muhsan AS, Abdulkadir SJ, Hussein IA, et al. Prediction of critical total drawdown in sand production from gas wells: Machine learning approach. The Canadian Journal of Chemical Engineering. 2023;101(5):2493-2509. doi:10.1002/cjce.24640
BibTeX
@article{Alakbari2023,
author = {Alakbari, Fahd Saeed and Mohyaldinn, Mysara Eissa and Ayoub, Mohammed Abdalla and Muhsan, Ali Samer and Abdulkadir, Said Jadid and Hussein, Ibnelwaleed A. and Salih, Abdullah Abduljabbar},
title = {Prediction of critical total drawdown in sand production from gas wells: Machine learning approach},
journal = {The Canadian Journal of Chemical Engineering},
year = {2023},
volume = {101},
number = {5},
pages = {2493--2509},
doi = {10.1002/cjce.24640}
}
EUVIMED