EUVIMEDEUVIMED entdecken
Crossref

Few‐Layer MoS 2 –Decorated MoO 2 for High‐Density Exposed Catalytic Heterointerfaces in Lithium–Sulfur Batteries

Zhen Wu iD, Wenfeng He, Zhengyang Wang, Guorui Shi, Renjie Xie, Jie Yang, Chenyao Hu, Wei Zhao, Fen Qiao, Junfeng Wang, Xin Wang, Yongsheng Fu iD

Chemistry – A European Journal · 03.11.2026 · 32 (41)

DOI: 10.1002/chem.71577 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chemistry – A European Journal, online erschienen am 17.08.2026. Verfasst von Zhen Wu und 11 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy and Power Engineering, Jiangsu University, Zhenjiang, Jiangsu, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province, China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium–sulfur batteries are severely limited by polysulfide shuttling and sluggish sulfur redox kinetics. Efficient catalysis in lithium–sulfur (Li–S) batteries requires not only intrinsically active catalyst materials but also catalytic interfaces with high structural exposure and electrochemical accessibility. Here, a few‐layer MoS 2 –decorated MoO 2 composite integrated with carbon nanotubes is developed as a functional separator coating with a high density of exposed catalytic heterointerfaces. In this composite, polar MoO 2 strongly anchors lithium polysulfides, while highly dispersed few‐layer MoS 2 nanoflakes provide abundant MoO 2 –MoS 2 heterointerfaces, accelerating polysulfide conversion. Meanwhile, the MoO 2 –MoS 2 junction provides balanced polysulfide adsorption and pronounced charge redistribution, thereby promoting the activation and subsequent conversion of reaction intermediates. Li 2 S nucleation tests and in situ x‐ray diffraction further verify the accelerated kinetics of polysulfide conversion and the improved reversibility of Li 2 S formation. As a result, Li–S cells deliver a high specific capacity of 1236 mAh g −1 at 0.2 C and retain 475 mAh g −1 after 1000 cycles at 1 C, highlighting the promise of constructing high‐density exposed catalytic heterointerfaces for high‐performance Li–S batteries.

Schlagwörter

Stichwörter der Autor:innen

exposed heterointerfacesfew‐layer MoS2lithium–sulfur batteriesmodified separatorpolysulfide catalysis

Autor:innen und Institutionen

  • School of Energy and Power Engineering, Jiangsu University, Zhenjiang, Jiangsu, China.
  • Key Laboratory for Soft Chemistry and Functional Materials of Ministry of Education, Nanjing University of Science and Technology, Nanjing, Jiangsu, China.
  • College of Science & Institute of Materials Physics and Chemistry, Nanjing Forestry University, Nanjing, Jiangsu, China.

ORCID-Profile: Zhen Wu, Yongsheng Fu

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Jiangsu Province
  • China Postdoctoral Science Foundation
  • Jiangsu Province Young Scientific and Technological Talents Promotion Plan

Zitieren

APA

Wu, Z., He, W., Wang, Z., Shi, G., Xie, R., Yang, J., Hu, C., Zhao, W., Qiao, F., Wang, J., Wang, X., & Fu, Y. (2026). Few‐Layer MoS 2 –Decorated MoO 2 for High‐Density Exposed Catalytic Heterointerfaces in Lithium–Sulfur Batteries. Chemistry – A European Journal, 32(41). https://doi.org/10.1002/chem.71577

Vancouver

Wu Z, He W, Wang Z, Shi G, Xie R, Yang J, et al. Few‐Layer MoS 2 –Decorated MoO 2 for High‐Density Exposed Catalytic Heterointerfaces in Lithium–Sulfur Batteries. Chemistry – A European Journal. 2026;32(41). doi:10.1002/chem.71577

BibTeX
@article{Wu2026,
  author = {Wu, Zhen and He, Wenfeng and Wang, Zhengyang and Shi, Guorui and Xie, Renjie and Yang, Jie and Hu, Chenyao and Zhao, Wei and Qiao, Fen and Wang, Junfeng and Wang, Xin and Fu, Yongsheng},
  title = {Few‐Layer MoS 2 –Decorated MoO 2 for High‐Density Exposed Catalytic Heterointerfaces in Lithium–Sulfur Batteries},
  journal = {Chemistry – A European Journal},
  year = {2026},
  volume = {32},
  number = {41},
  doi = {10.1002/chem.71577}
}
Kostenlos starten →