EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tailoring the Ionomer Type to Optimize Catalyst Microenvironment for Enhanced CO 2 Reduction in Membrane Electrode Assemblies

Meng Cao, Hong Miao, Jingchen Li, Chengda Liu, Xin Wang, Yongzhu Fu

Carbon Energy · 2025-12 · 7 (12)

DOI: 10.1002/cey2.70087 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Carbon Energy, online erschienen am 15.10.2025. Verfasst von Meng Cao und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrocatalytic CO 2 reduction reaction (CO 2 RR) represents an advanced technology for converting CO 2 into highly valuable chemicals. Although significant progress has been achieved in producing multi‐carbon chemicals such as ethylene (C 2 H 4 ), addressing (bi)carbonate salt formation and precipitation in alkaline electrolytes remains a critical challenge for achieving long‐term stability during industrialization. We developed a Cu 2 (OH) 2 CO 3 /Mg 2+ /C pre‐catalyst, which transforms into a catalytically active Cu 0 /Cu 2+ /Mg 2+ composite by electroreduction. Crucially, the application of different ionomers (specifically Sustainion XA‐9) on this composite catalyst effectively alleviates salt precipitation issues, thereby enabling high‐selectivity, durable CO 2 ‐to‐C 2+ conversion. In a membrane electrode assembly, the maximum Faradaic efficiency for C 2+ products reaches 80%, with stable operation at 200 mA cm −2 for 50 h. In situ Raman spectroscopy reveals that only top‐type *CO intermediate exists on the Cu 0 /Cu 2+ /Nafion cathode, whereas both bridge‐type and top‐type of *CO sites coexist on the Cu 0 /Cu 2+ /Mg 2+ /Sustainion XA‐9 cathode. This dual adsorption configuration facilitates the C─C coupling kinetics on the catalyst, inducing a favorable microenvironment for selective C 2+ formation. Therefore, strategic optimization of catalyst architectures and ionomer engineering enables CO 2 RR with improved efficiency and durability, advancing green chemistry and carbon‐neutral technologies.

Zitieren

APA

Cao, M., Miao, H., Li, J., Liu, C., Wang, X., & Fu, Y. (2025). Tailoring the Ionomer Type to Optimize Catalyst Microenvironment for Enhanced CO 2 Reduction in Membrane Electrode Assemblies. Carbon Energy, 7(12). https://doi.org/10.1002/cey2.70087

Vancouver

Cao M, Miao H, Li J, Liu C, Wang X, Fu Y. Tailoring the Ionomer Type to Optimize Catalyst Microenvironment for Enhanced CO 2 Reduction in Membrane Electrode Assemblies. Carbon Energy. 2025;7(12). doi:10.1002/cey2.70087

BibTeX
@article{Cao2025,
  author = {Cao, Meng and Miao, Hong and Li, Jingchen and Liu, Chengda and Wang, Xin and Fu, Yongzhu},
  title = {Tailoring the Ionomer Type to Optimize Catalyst Microenvironment for Enhanced CO 2 Reduction in Membrane Electrode Assemblies},
  journal = {Carbon Energy},
  year = {2025},
  volume = {7},
  number = {12},
  doi = {10.1002/cey2.70087}
}
Kostenlos starten →