Ablation Properties of HfC–SiC–WC Ultra‐High Temperature Ceramics Produced by Pressureless Sintering
International Journal of Ceramic Engineering & Science · 2026-07 · 8 (4)
DOI: 10.1002/ces2.70057 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Ceramic Engineering & Science, online erschienen am 26.05.2026. Verfasst von C. Doolittle und 8 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
HfC–SiC is one of the leading thermal insulation ceramics that has the potential to perform well under high thermomechanical loads. In this study, we explore the use of pressureless sintering to produce this material at relatively low temperatures (2100°C) and focus on understanding the effect of adding WC, in the 0 to 20 wt.% range, on its ablation resistance. The sintered samples were evaluated for their relative density, phase composition, morphology, microstructure, Vickers hardness, and bending strength. The relative density and the Vickers hardness increased from 89% to 97% and from 13.0 to 18.4 GPa, respectively, when the WC content increased from 0 to 20 wt.%. A relatively high value of 480 MPa for the bending strength was measured for the sample with 10 wt.% WC, which was attributed to the more refined microstructure. Oxyacetylene torch testing in tandem with cross‐section micrographs and elemental composition mapping revealed that the addition of WC increased protection in an ablative environment. The observed enhanced oxidation protective ability of these UHTCs is linked to the retention of Si during the ablation process to form an amorphous Hf–Si–W–O overlayer. The retention of Si ensures that a glassy and viscous silicate phase is formed on the surface of the sample. This protective oxide phase restricts volatile oxide phase formation and thus reduces surface porosity and oxygen diffusion. In addition, the viscous tungsten‐silicate phase provides self‐healing of surface defects and improves bending strength.
Zitieren
APA
Doolittle, C., Burk, D., Serrano, N., Rodriguez, J., Ghoshal, A., Vargas‐Gonzalez, L., Young, M. L., Voevodin, A. A., & Aouadi, S. M. (2026). Ablation Properties of HfC–SiC–WC Ultra‐High Temperature Ceramics Produced by Pressureless Sintering. International Journal of Ceramic Engineering & Science, 8(4). https://doi.org/10.1002/ces2.70057
Vancouver
Doolittle C, Burk D, Serrano N, Rodriguez J, Ghoshal A, Vargas‐Gonzalez L, et al. Ablation Properties of HfC–SiC–WC Ultra‐High Temperature Ceramics Produced by Pressureless Sintering. International Journal of Ceramic Engineering & Science. 2026;8(4). doi:10.1002/ces2.70057
BibTeX
@article{Doolittle2026,
author = {Doolittle, C. and Burk, D. and Serrano, N. and Rodriguez, J. and Ghoshal, A. and Vargas‐Gonzalez, L. and Young, M. L. and Voevodin, A. A. and Aouadi, S. M.},
title = {Ablation Properties of HfC–SiC–WC Ultra‐High Temperature Ceramics Produced by Pressureless Sintering},
journal = {International Journal of Ceramic Engineering & Science},
year = {2026},
volume = {8},
number = {4},
doi = {10.1002/ces2.70057}
}
EUVIMED