EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Additive manufacturing of textured barium titanate ceramics via shear force‐induced platelet alignment

Alexis Lopez, Luis Rodriguez, Aaron Rodriguez, Sabina Arroyo, Alan Loera, Diana Fontes, Sofia Perez, Md Shahjahan Mahmud, Laura Molina, Saqlain Zaman, Cory Marquez, Joshua Dantzler und 2 weitere

International Journal of Ceramic Engineering & Science · 2025-03 · 7 (2)

DOI: 10.1002/ces2.70003 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Ceramic Engineering & Science, online erschienen am 24.02.2025. Verfasst von Alexis Lopez und 13 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores the potential of single crystal barium titanate (BTO) platelets to fabricate nontoxic ceramics with enhanced material properties through texturization of grain structure. The proposed methodology relies on direct ink write additive manufacturing to enable grain‐oriented growth of BTO ceramics by utilizing a combination of spherical and platelet‐shaped particles. The use of platelet‐shaped particles in the ceramic ink guides particle alignment parallel to the build plate due to shear forces at the nozzle during the printing process. While platelet contents ranging from 0 to 40 wt.% showed a decrease in density as the content increased, experimental data revealed an incremental trend between platelet content, dielectric properties, and the degree of alignment of the particles on the F200 crystal plane, achieving a maximum texturized orientation of 65%. Such orientation resulted in 29.55% improved dielectric properties compared with randomly oriented BTO ceramic. The findings of this research validate the effectiveness of additive manufacturing technologies to tailor the microstructural characteristics of ceramics for specific functional applications.

Förderung

  • National Science Foundation

Zitieren

APA

Lopez, A., Rodriguez, L., Rodriguez, A., Arroyo, S., Loera, A., Fontes, D., Perez, S., Mahmud, M. S., Molina, L., Zaman, S., Marquez, C., Dantzler, J., Renteria, A., & Lin, Y. (2025). Additive manufacturing of textured barium titanate ceramics via shear force‐induced platelet alignment. International Journal of Ceramic Engineering & Science, 7(2). https://doi.org/10.1002/ces2.70003

Vancouver

Lopez A, Rodriguez L, Rodriguez A, Arroyo S, Loera A, Fontes D, et al. Additive manufacturing of textured barium titanate ceramics via shear force‐induced platelet alignment. International Journal of Ceramic Engineering & Science. 2025;7(2). doi:10.1002/ces2.70003

BibTeX
@article{Lopez2025,
  author = {Lopez, Alexis and Rodriguez, Luis and Rodriguez, Aaron and Arroyo, Sabina and Loera, Alan and Fontes, Diana and Perez, Sofia and Mahmud, Md Shahjahan and Molina, Laura and Zaman, Saqlain and Marquez, Cory and Dantzler, Joshua and Renteria, Anabel and Lin, Yirong},
  title = {Additive manufacturing of textured barium titanate ceramics via shear force‐induced platelet alignment},
  journal = {International Journal of Ceramic Engineering & Science},
  year = {2025},
  volume = {7},
  number = {2},
  doi = {10.1002/ces2.70003}
}
Kostenlos starten →