EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cyclic quasi‐static testing of aluminium hollow section beam members

Evangelia Georgantzia

ce/papers · 2026-09 · 9 (2-3) · 730-734

DOI: 10.1002/cepa.70793 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Evangelia Georgantzia. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper reports on an experimental programme aimed at characterising, for the first time, the nonlinear cyclic flexural response of hollow aluminium tubular beams subjected to large rotations, reaching up to 0.08 rad. Tests were conducted on four different tubular cross‐sections, manufactured from two commonly used structural aluminium alloys (6082‐T6 and 6063‐T6) with varying slenderness ratios. The results provide comprehensive insight into the hysteretic flexural performance of these members. All specimens exhibited stable hysteresis loops with minimal loss of strength and stiffness under repeated loading. Key parameters such as plastic hinge deformation, ultimate load capacity, failure mechanisms, secant stiffness reduction, and energy dissipation were systematically evaluated, highlighting the influence of alloy type and cross‐sectional slenderness. Digital Image Correlation (DIC) analysis further indicated that, at high cyclic load levels, the average plastic hinge length extends to approximately 1.5 times the largest cross‐sectional dimension from the fixed end of the beams. Overall, the findings confirm that hollow aluminium members can sustain significant cyclic deformations without severe structural deterioration, demonstrating their potential for applications requiring ductility and resilience.

Zitieren

APA

Georgantzia, E. (2026). Cyclic quasi‐static testing of aluminium hollow section beam members. ce/papers, 9(2-3), 730-734. https://doi.org/10.1002/cepa.70793

Vancouver

Georgantzia E. Cyclic quasi‐static testing of aluminium hollow section beam members. ce/papers. 2026;9(2-3):730-734. doi:10.1002/cepa.70793

BibTeX
@article{Georgantzia2026,
  author = {Georgantzia, Evangelia},
  title = {Cyclic quasi‐static testing of aluminium hollow section beam members},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {730--734},
  doi = {10.1002/cepa.70793}
}
Kostenlos starten →