Stiffness Prediction of Externally Welded T‐Joints with CHS Chords and Longitudinal Plates
ce/papers · 2026-09 · 9 (2-3) · 1879-1884
DOI: 10.1002/cepa.70792 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Ali Ajwad und 3 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In steel braced low‐rise buildings, the joint between a longitudinal branch plate and a hollow structural section (HSS) member is a critical brace attachment detail. These joints can exhibit limited axial stiffness, leading to noticeable deformation of the tube wall. Although Eurocode 3 Part 1.8 provides rules for plastic resistance, it does not offer a method for predicting initial stiffness. As a result, designers often select oversized hollow sections, increasing construction costs. To address this gap, this study performs a finite element (FE) based preliminary parametric investigation of longitudinal T‐type plate connections to circular hollow sections (CHS) under axial tension and compression. The objective is to quantify the influence of key geometric and connection parameters on initial stiffness and to establish consistent stiffness trends across loading modes. Based on the understandings from this parametric study, a closed‐form analytical formulation is developed using the Togo Ring Model. The resulting stiffness equations are then assessed against the numerical database consisting of 130 T‐joint cases (65 in tension and 65 in compression). The proposed expressions predict initial stiffness with a mean of 1.0 and a coefficient of variation of approximately 8%.
Zitieren
APA
Ajwad, A., Benedetto, S. D., Latour, M., & Rizzano, G. (2026). Stiffness Prediction of Externally Welded T‐Joints with CHS Chords and Longitudinal Plates. ce/papers, 9(2-3), 1879-1884. https://doi.org/10.1002/cepa.70792
Vancouver
Ajwad A, Benedetto SD, Latour M, Rizzano G. Stiffness Prediction of Externally Welded T‐Joints with CHS Chords and Longitudinal Plates. ce/papers. 2026;9(2-3):1879-1884. doi:10.1002/cepa.70792
BibTeX
@article{Ajwad2026,
author = {Ajwad, Ali and Benedetto, Sabatino Di and Latour, Massimo and Rizzano, Gianvittorio},
title = {Stiffness Prediction of Externally Welded T‐Joints with CHS Chords and Longitudinal Plates},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {1879--1884},
doi = {10.1002/cepa.70792}
}
EUVIMED