EUVIMEDEUVIMED entdecken
Crossref

Effect of End Distance on the Performance of Cold‐Formed Steel Bolted Connections at Elevated Temperatures

Ranjithkumar Madheswaran, Mahendrakumar Madhavan

ce/papers · 2026-09 · 9 (2-3) · 2211-2215

DOI: 10.1002/cepa.70784 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Ranjithkumar Madheswaran und 1 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the behavior of cold‐formed steel (CFS) bolted connections fabricated from low‐strength steel under elevated temperatures. A total of 56 lap shear tests were conducted at seven nominal temperature levels up to 900 °C using the steady‐state method, where temperature was kept constant while load was gradually applied until failure. The experimental program examined the effects of end distance, bolt number, and pitch distance on the structural performance of the connections. Results showed a progressive reduction in connection strength with rising temperature, closely following the degradation of material strength. Two distinct failure modes, bearing and shear‐out, were observed, the latter being particularly critical at shorter end distances. A minimum end distance is recommended as a preventive design measure to minimize such failures. The test results were compared with the design provisions of AISI S100–16 (2020), AS 4600, and Eurocode 3 (EC3 1‐2), and the level of agreement was examined. A reliability analysis was then carried out, leading to the proposal of revised safety and resistance factors for the considered standards.

Zitieren

APA

Madheswaran, R., & Madhavan, M. (2026). Effect of End Distance on the Performance of Cold‐Formed Steel Bolted Connections at Elevated Temperatures. ce/papers, 9(2-3), 2211-2215. https://doi.org/10.1002/cepa.70784

Vancouver

Madheswaran R, Madhavan M. Effect of End Distance on the Performance of Cold‐Formed Steel Bolted Connections at Elevated Temperatures. ce/papers. 2026;9(2-3):2211-2215. doi:10.1002/cepa.70784

BibTeX
@article{Madheswaran2026,
  author = {Madheswaran, Ranjithkumar and Madhavan, Mahendrakumar},
  title = {Effect of End Distance on the Performance of Cold‐Formed Steel Bolted Connections at Elevated Temperatures},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {2211--2215},
  doi = {10.1002/cepa.70784}
}
Kostenlos starten →