Experimental investigation on novel cold‐formed steel built‐up section stub columns using an interlocking design
ce/papers · 2026-09 · 9 (2-3) · 2252-2258
DOI: 10.1002/cepa.70777 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Ke‐Jiang Zhan und 3 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The interlocking design concept facilitates a demountable and reusable connection method that eliminates the need for traditional connectors. This paper presents the development of a novel cold‐formed steel built‐up section using an interlocking design and provides an experimental investigation into the structural performance of stub columns made of these innovative built‐up sections. The built‐up sections were assembled by interlocking two channel components at the flanges, which were brake‐pressed from zinc‐coated steel sheets with a nominal yield strength of 450 MPa. A total of four fixed‐ended stub columns using an interlocking design were tested under axial compression. To compare their behaviour with that of specimens using traditional connectors, another four built‐up section stub columns using screws with the same configurations were experimentally investigated. Tensile coupon tests were conducted to determine the material properties of the test specimens. Test results, including ultimate capacities, failure modes, and load versus axial shortening responses, were obtained and thoroughly reported. It was demonstrated that this design can achieve the interlocking effect and the novel built‐up section stub columns outperform the traditional built‐up section stub columns using screws by exhibiting a significant increase in ultimate capacity within the same configurations.
Zitieren
APA
Zhan, K., Li, S., Chan, T., & Young, B. (2026). Experimental investigation on novel cold‐formed steel built‐up section stub columns using an interlocking design. ce/papers, 9(2-3), 2252-2258. https://doi.org/10.1002/cepa.70777
Vancouver
Zhan K, Li S, Chan T, Young B. Experimental investigation on novel cold‐formed steel built‐up section stub columns using an interlocking design. ce/papers. 2026;9(2-3):2252-2258. doi:10.1002/cepa.70777
BibTeX
@article{Zhan2026,
author = {Zhan, Ke‐Jiang and Li, Shuai and Chan, Tak‐Ming and Young, Ben},
title = {Experimental investigation on novel cold‐formed steel built‐up section stub columns using an interlocking design},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {2252--2258},
doi = {10.1002/cepa.70777}
}
EUVIMED