EUVIMEDEUVIMED entdecken
Crossref

Cleat angle behaviour in C‐shaped purlin‐to‐rafter connections: experimental study and design considerations

Chandragiri Hari Narayana, Mahendrakumar Mathialaghu Madhavan

ce/papers · 2026-09 · 9 (2-3) · 2181-2186

DOI: 10.1002/cepa.70742 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Chandragiri Hari Narayana und 1 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the pull‐through failure behavior of Cold‐Formed Steel (CFS) C‐shaped purlin‐ to‐rafter connections using cleat angles. A total of 72 tests were conducted to investigate the influence of parameters such as cleat angle leg length, purlin thickness, cleat angle thickness, and screw head diameter. A small‐scale experimental setup was developed to simulate wind uplift loading conditions, and strain measurements were captured using Three‐Dimensional Digital Image Correlation (3D‐DIC). Three distinct pull‐through failure modes were identified: (1) rupture‐type failure in the cleat angle, (2) bearing‐type failure in the cleat angle accompanied by tearing of the purlin web, and (3) bearing‐type failure with screw shank fracture. These failure modes varied based on cleat angle thickness ( t c ), purlin thickness ( t p ), screw head diameter ( d w ), and the ultimate tensile strength of the material ( f u ). The experimental results show that existing design guidelines underestimate the pull‐through capacity of these connections. A revised design equation is suggested to better predict connection performance. The study also presents a method for calculating the initial elastic stiffness of such connections.

Zitieren

APA

Narayana, C. H., & Madhavan, M. M. (2026). Cleat angle behaviour in C‐shaped purlin‐to‐rafter connections: experimental study and design considerations. ce/papers, 9(2-3), 2181-2186. https://doi.org/10.1002/cepa.70742

Vancouver

Narayana CH, Madhavan MM. Cleat angle behaviour in C‐shaped purlin‐to‐rafter connections: experimental study and design considerations. ce/papers. 2026;9(2-3):2181-2186. doi:10.1002/cepa.70742

BibTeX
@article{Narayana2026,
  author = {Narayana, Chandragiri Hari and Madhavan, Mahendrakumar Mathialaghu},
  title = {Cleat angle behaviour in C‐shaped purlin‐to‐rafter connections: experimental study and design considerations},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {2181--2186},
  doi = {10.1002/cepa.70742}
}
Kostenlos starten →