EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Local Buckling Strength and Plastic Deformation Capacity of H‐Shaped Steel Columns under Different Directional Bending at Member Ends

Yoshihiro Kawaguchi, Rorsina Osman, Kosuke Sato

ce/papers · 2026-09 · 9 (2-3) · 2011-2016

DOI: 10.1002/cepa.70735 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Yoshihiro Kawaguchi und 2 weiteren Autor:innen. Die Arbeit nennt 7 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

H‐shaped section members are used as columns and beams in steel structures, and local buckling is one of the key factors affecting their seismic performance. Numerous studies have been conducted on local buckling in the stub columns under pure compression and in the beams under shear and bending. However, the local buckling behavior of H‐shaped columns simultaneously subjected to compression and shear bending, particularly when bending acts in different directions at the member ends, remains insufficiently understood. In this study, the elastic local buckling strength of H‐shaped section columns under different directional bending at the member ends is theoretically derived using the energy method, considering the coupled effects of plate elements. The results show a relative error of less than 10% between the energy method and FEM. Furthermore, static monotonic FEM analyses are conducted, and the ultimate strength and plastic deformation capacity are evaluated using the normalized width‐thickness ratios as well as conventional flange width‐‐thickness ratios. As a result, the evaluation using the normalized width‐‐thickness ratio is shown to reduce scatter along the horizontal axis, as it accounts for the restraint effects between adjacent plate elements and the loading conditions.

Zitieren

APA

Kawaguchi, Y., Osman, R., & Sato, K. (2026). Local Buckling Strength and Plastic Deformation Capacity of H‐Shaped Steel Columns under Different Directional Bending at Member Ends. ce/papers, 9(2-3), 2011-2016. https://doi.org/10.1002/cepa.70735

Vancouver

Kawaguchi Y, Osman R, Sato K. Local Buckling Strength and Plastic Deformation Capacity of H‐Shaped Steel Columns under Different Directional Bending at Member Ends. ce/papers. 2026;9(2-3):2011-2016. doi:10.1002/cepa.70735

BibTeX
@article{Kawaguchi2026,
  author = {Kawaguchi, Yoshihiro and Osman, Rorsina and Sato, Kosuke},
  title = {Local Buckling Strength and Plastic Deformation Capacity of H‐Shaped Steel Columns under Different Directional Bending at Member Ends},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {2011--2016},
  doi = {10.1002/cepa.70735}
}
Kostenlos starten →