EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Innovative side‐framed lightweight steel system: experimental and analytical study

Sarmad Shakeel, Pier Giovanni Benzo, Seyed Mohammad Mojtabaei, Buick Davison, Iman Hajirasouliha

ce/papers · 2026-09 · 9 (2-3) · 2318-2323

DOI: 10.1002/cepa.70711 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Sarmad Shakeel und 4 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lightweight steel framing (LSF) systems are becoming popular as low‐carbon systems, helping to reduce greenhouse gas emissions. However, conventional floor‐to‐wall LSF connections result in oversized joists due to deflection‐governed design and premature failures caused by load eccentricities limiting the LSF systems structural efficiency. To overcome these barriers, a new approach was developed that fastens the webs of the studs and joists. Preliminary analyses showed increased connection rotational stiffness leading to more efficient designs. However, the simulation of fastener behaviour relied on an implicit method providing only partial insights into the critical screw shear and hole bearing deformations. A comprehensive experimental programme was conducted on the newly proposed side‐framed system using full‐scale specimens consisting of a two‐stud and joist assembly tested under cantilever loading. After an initial monotonic test, six cyclic tests were performed on various configurations, assessing elements slenderness, number of screws, and flooring deck presence to observe different failure modes. The results indicated that selecting adequate stud thickness and screws quantity can significantly enhance connection stiffness, leading to more efficient joist designs.

Zitieren

APA

Shakeel, S., Benzo, P. G., Mojtabaei, S. M., Davison, B., & Hajirasouliha, I. (2026). Innovative side‐framed lightweight steel system: experimental and analytical study. ce/papers, 9(2-3), 2318-2323. https://doi.org/10.1002/cepa.70711

Vancouver

Shakeel S, Benzo PG, Mojtabaei SM, Davison B, Hajirasouliha I. Innovative side‐framed lightweight steel system: experimental and analytical study. ce/papers. 2026;9(2-3):2318-2323. doi:10.1002/cepa.70711

BibTeX
@article{Shakeel2026,
  author = {Shakeel, Sarmad and Benzo, Pier Giovanni and Mojtabaei, Seyed Mohammad and Davison, Buick and Hajirasouliha, Iman},
  title = {Innovative side‐framed lightweight steel system: experimental and analytical study},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {2318--2323},
  doi = {10.1002/cepa.70711}
}
Kostenlos starten →