Steady state tests of wire arc additively manufactured steel coupons at elevated temperatures
ce/papers · 2026-09 · 9 (2-3) · 505-510
DOI: 10.1002/cepa.70690 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Peishi Liao und 1 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben.
Abstract (Originalsprache)
This paper presents an experimental investigation on the material properties of wire arc additive manufacturing (WAAM) steel at elevated temperatures ranging from 22 to 1000 °C. A total of 24 WAAM coupons were extracted from square tubes fabricated using ER70S‐6 feedstock wire, in orientations parallel (Pa) and perpendicular (Pe) to the printing direction. These specimens were tested using the steady state method. Stress‐strain curves were obtained, from which the material properties were extracted, including elastic modulus, yield strength, strength at 2.0% total strain, ultimate strength, ultimate strain and fracture strain. Retention factors for these material properties were calculated and compared with those specified in the steel design codes for conventionally manufactured steel, including EC 3, AISC 360 and AS 4100. Generally, it was found that for the retention factors of elastic modulus, EC 3 and AISC 360 provide conservative predictions; those from AS 4100 are overall conservative for Pa specimens but unconservative for Pe specimens. For the retention factors of yield strength, the predictions from AS 4100 are generally un‐conservative at temperatures ranging from 22 to 800 °C. The retention factors for strength at 2.0% total strain from EC 3 and AISC 360, as well as those for ultimate strength predicted by AISC 360, are conservative between 22 and 300 °C but un‐conservative between 400 and 800 °C.
Zitieren
APA
Liao, P., & Cai, Y. (2026). Steady state tests of wire arc additively manufactured steel coupons at elevated temperatures. ce/papers, 9(2-3), 505-510. https://doi.org/10.1002/cepa.70690
Vancouver
Liao P, Cai Y. Steady state tests of wire arc additively manufactured steel coupons at elevated temperatures. ce/papers. 2026;9(2-3):505-510. doi:10.1002/cepa.70690
BibTeX
@article{Liao2026,
author = {Liao, Peishi and Cai, Yancheng},
title = {Steady state tests of wire arc additively manufactured steel coupons at elevated temperatures},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {505--510},
doi = {10.1002/cepa.70690}
}
EUVIMED