Slip Coefficients of High Strength Bolted Double‐Shear Friction Joints with Slotted Holes
ce/papers · 2026-09 · 9 (2-3) · 1786-1791
DOI: 10.1002/cepa.70682 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Kohei Yamamoto und 3 weiteren Autor:innen. Die Arbeit nennt 8 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Eliminating fabrication tolerances in steel structures is difficult, making connections that absorb deviations essential. Slotted holes are effective for this purpose; however, regulatory treatment varies. While Western standards like Eurocode and AASHTO permit their use with reduction factors, the Building Standard Law of Japan does not include provisions for defined coefficients, requiring special approval. Additionally, research on single‐bolt configurations—critical for secondary members—remains limited compared to multi‐bolt studies. This study investigates the effect of slotted holes on slip coefficients. Slip tests were conducted on double‐shear friction grip connections using SS400 plates and M20 F10T bolts with shot‐blasted surfaces. Specimens with base plate thicknesses of 9, 12, and 16 mm were tested to assess the influence of hole geometry and orientation. Finite Element Analysis models were subsequently developed using Abaqus. After validating these models against experimental data, a parametric study examined variables such as splice plate thickness. The results showed that slotted holes had a negligible effect on slip coefficients within the investigated range. This study thus demonstrates the feasibility of applying slotted holes to building structures under these conditions.
Zitieren
APA
Yamamoto, K., Sato, K., Haginoya, M., & Taguchi, T. (2026). Slip Coefficients of High Strength Bolted Double‐Shear Friction Joints with Slotted Holes. ce/papers, 9(2-3), 1786-1791. https://doi.org/10.1002/cepa.70682
Vancouver
Yamamoto K, Sato K, Haginoya M, Taguchi T. Slip Coefficients of High Strength Bolted Double‐Shear Friction Joints with Slotted Holes. ce/papers. 2026;9(2-3):1786-1791. doi:10.1002/cepa.70682
BibTeX
@article{Yamamoto2026,
author = {Yamamoto, Kohei and Sato, Kosuke and Haginoya, Manabu and Taguchi, Takashi},
title = {Slip Coefficients of High Strength Bolted Double‐Shear Friction Joints with Slotted Holes},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {1786--1791},
doi = {10.1002/cepa.70682}
}
EUVIMED