EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Load bearing capacity of bolted connections made of carbon and stainless steel in oversized and slotted holes

Dominik Jungbluth, Natalie Stranghöner

ce/papers · 2026-09 · 9 (2-3) · 1688-1693

DOI: 10.1002/cepa.70655 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Dominik Jungbluth und 1 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Design rules for non‐preloaded bolted connections acting as bearing‐type connections (Category A) are specified in EN 1993‐1‐8 for carbon steel bolts and in EN 1993‐1‐4 for stainless steel bolts only for normal round holes. In practical steel construction, however, oversized round holes as well as short and long slotted holes are frequently used in addition to standard round holes. Despite their widespread application, current design provisions for bearing‐type connections made of carbon and stainless steel are limited to standard round holes. To address this regulatory gap, experimental investigations are being carried out within the German IGF research project 01IF23125N at the Institute for Metal and Lightweight Structures of the University of Duisburg‐Essen. The investigations focus on the influence of increased hole clearances and different hole geometries on the shear resistance as well as the interaction and tension behaviour of carbon and stainless steel bolts by comparing connections with standard round holes to those with oversized round holes as well as short and long slotted holes. Initial results indicate that the shear resistance of connections with enlarged hole clearances is only marginally affected. Based on these findings, the contribution presents new experimental results aimed at supporting future extensions of the design provisions in EN 1993‐1‐8 and EN 1993‐1‐4 and improving the reliability of bolted connections.

Zitieren

APA

Jungbluth, D., & Stranghöner, N. (2026). Load bearing capacity of bolted connections made of carbon and stainless steel in oversized and slotted holes. ce/papers, 9(2-3), 1688-1693. https://doi.org/10.1002/cepa.70655

Vancouver

Jungbluth D, Stranghöner N. Load bearing capacity of bolted connections made of carbon and stainless steel in oversized and slotted holes. ce/papers. 2026;9(2-3):1688-1693. doi:10.1002/cepa.70655

BibTeX
@article{Jungbluth2026,
  author = {Jungbluth, Dominik and Stranghöner, Natalie},
  title = {Load bearing capacity of bolted connections made of carbon and stainless steel in oversized and slotted holes},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {1688--1693},
  doi = {10.1002/cepa.70655}
}
Kostenlos starten →